Thanks Tony.
What about the turn signal lights as well or did you not change them. Did you do rear lights?
What about the turn signal lights as well or did you not change them. Did you do rear lights?
Oh 4our build
- Thread starter Speedslow
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Tonyrodz
Resident Resident
Comes with the parking lights. Same thing with the silicone and grease. I'm using all leds for the front lights.
I don't have led rear lights. I've read lots of horror stories about them burning out in a year or less. I have these with non leds for the brake/turn signals.
I do have leds in the backup lenses.
Ok. I should have looked closer. I do see now that in the Amazon site pics they are stacked on each other in the pic. So that part number is both sides, headlight assemblies and turn signal and park light assemblies. That is a damn good price for all of that.
Ok. I should have looked closer. I do see now that in the Amazon site pics they are stacked on each other in the pic. So that part number is both sides, headlight assemblies and turn signal and park light assemblies. That is a damn good price for all of that.
Tonyrodz
Resident Resident
Yessir, 4 assemblies total. I really like them, and with the leds light output is not bad.
OP
OP
Speedslow
Member
- Joined
- Feb 26, 2020
- Posts
- 61
- Reaction score
- 81
These look really good!!
Tonyrodz
Resident Resident
Thx.
Nice work so far, love that paint.
donbalo
TYF Newbie
- Joined
- Mar 30, 2020
- Posts
- 10
- Reaction score
- 9
how low did you go and what rim and tire combo you going with thanks in advance
donbalo
TYF Newbie
- Joined
- Mar 30, 2020
- Posts
- 10
- Reaction score
- 9
beautiful truck . i lowered mines on dub 24s on a 2/3 drop . wanna got a little lower n n different tire size what u think buddy
OP
OP
Speedslow
Member
- Joined
- Feb 26, 2020
- Posts
- 61
- Reaction score
- 81
Finally got it on the road today so here is a little teaser shot all buffed new lights all around and black wheels
Looking good. Need to match the tint on those front windows and I’m not a fan of vent visors but nice work so far. Bigger wheels would really look good on that too. Just my opinion though.
OP
OP
Speedslow
Member
- Joined
- Feb 26, 2020
- Posts
- 61
- Reaction score
- 81
Windows are getting done tomorrow,, and I was hesitant on the visors too but they are Channel mounts so they just pull out easy if I ever wanted to remove them
donbalo
TYF Newbie
- Joined
- Mar 30, 2020
- Posts
- 10
- Reaction score
- 9
before and after cold air intake looks good and sounds great
OP
OP
Speedslow
Member
- Joined
- Feb 26, 2020
- Posts
- 61
- Reaction score
- 81
Little update. Tinted, wheels and a few other goodies
Tonyrodz
Resident Resident
How're those headlights doing so far? Are the light bars hooked to the parking lights? Getting any moisture in there?
ivin74
05 NBS Nali
I need a new paint job, maybe you can take care of it. Lol
Looks great with those wheels.
OP
OP
Speedslow
Member
- Joined
- Feb 26, 2020
- Posts
- 61
- Reaction score
- 81
I ended up taking them out and re sealing just the lowers lights because they fogged. All the led bars and clusters on the corner are wired to the parking lights. Deleted the drls from the lowers and added another blinker in its place so the whole lower light is now my blinkers all the way across.
05Single
afraid of the dark
- Joined
- Feb 26, 2015
- Posts
- 8,243
- Reaction score
- 11,639
Looking good. Nice work . Any more plans ?
OP
OP
Speedslow
Member
- Joined
- Feb 26, 2020
- Posts
- 61
- Reaction score
- 81
Done with the body and suspension. Next will be motor and trans.
