NS's 2005 ccsb Denali build

[NeverSatisfied]

Not that I know of. I’ve only seen them on amazon.

 

[kbuskill]

Not that I know of. I’ve only seen them on amazon.

I believe "Totalflow" is a "Magnaflow" knock off if I'm not mistaken.

Sounds good BTW.

 

[NeverSatisfied]

I believe so. But they also make some that resemble flowmaster and smaller “race bullet” types

thank you

 

[NeverSatisfied]

Everyone’s thoughts on upper/lower billet grille for this thing?

 

[adventurenali92]

Everyone’s thoughts on upper/lower billet grille for this thing?

I have mixed feelings on the billet grilles on these trucks. I guess it depends on the billet itself. I’ve seen some that just look terrible. And I’ve seen some that I thought looked ok. It sucks that you can’t get a matching lower piece to the stock honeycomb anymore unless you have something custom made.....

 

[NeverSatisfied]

Yeah if I could find something to match the stock I wouldn’t even consider billet

 

[NeverSatisfied]

Swapped out my dual 2.1 usb for a dual 3.0 with on/off button

 

[Tonyrodz]

Swapped out my dual 2.1 usb for a dual 3.0 with on/off button
View attachment 243472

I gotta get one of those, one day.

 

[NeverSatisfied]

13 bucks on amazon

 

[NeverSatisfied]

Budget friendly door speakers? Any suggestions? Noticed my front left door speaker is no longer in commission which also causes me to not have any warning chimes so if I’m gonna replace one might as well replace all 4

 

[07Burb]

Budget friendly door speakers? Any suggestions? Noticed my front left door speaker is no longer in commission which also causes me to not have any warning chimes so if I’m gonna replace one might as well replace all 4

IMO most bang for your buck is JL Audio. Good sound and won't break the bank

 

[iamdub]

Budget friendly door speakers? Any suggestions? Noticed my front left door speaker is no longer in commission which also causes me to not have any warning chimes so if I’m gonna replace one might as well replace all 4

I believe you're limited to a specific impedance (2 Ohm?) if you're connecting them to the Bose system. I think @Tonyrodz has some OEM Bose speakers for sale if you just wanna get it working for now until you're ready for a full system.

 

[NeverSatisfied]

IMO most bang for your buck is JL Audio. Good sound and won't break the bank

its been forever since I’ve actually changed door speakers in something. Only thing I ever do is add more bass lol

I believe you're limited to a specific impedance (2 Ohm?) if you're connecting them to the Bose system. I think @Tonyrodz has some OEM Bose speakers for sale if you just wanna get it working for now until you're ready for a full system.

I did not know that. I will do a little more research and may get ahold him as well.

appreciate the responses guys

 

[Tonyrodz]

I believe you're limited to a specific impedance (2 Ohm?) if you're connecting them to the Bose system. I think @Tonyrodz has some OEM Bose speakers for sale if you just wanna get it working for now until you're ready for a full system.

Sold those awhile ago. Thx for the shout out tho.

 

[iamdub]

Sold those awhile ago. Thx for the shout out tho.

Whale, shit.

@NeverSatisfied, factory Bose replacement speakers are usually pretty cheap from people parting out these rigs. That is, if you're okay with the way the factory system sounds (or sounded). I'm plenty satisfied enough with mine that upgrading isn't such a priority at the moment and I'd still replace just one speaker if I had a dead one.

There are aftermarket options that are direct replacements. I wanna say JBL makes some.

 

[NeverSatisfied]

Will most likely just grab a used one. Plenty of part out up here shouldn’t be to hard to find one

 

[NeverSatisfied]

Tinted tails the wrap installers way. Vvivid air tint light smoke is what I used

 

[Tonyrodz]

Tinted tails the wrap installers way. Vvivid air tint light smoke is what I used
View attachment 244121 View attachment 244119 View attachment 244120

Looks good. How's it feel to the touch? Sticky, rough, tacky? Sprayed it right?

 

[NeverSatisfied]

No sir this is vinyl. Smooth and glossy. It’s a dry apply air release vinyl. Really nice stuff. Having a professional paint/spray tint is still the superior/better way to go but this is a great alternative no permanent route as well. It’s has air channels throughout the back of it (Like any wrap film) which are visible when your up pretty close to it but from 5ft away you’d wouldn’t notice.

 

[Tonyrodz]

No sir this is vinyl. Smooth and glossy. It’s a dry apply air release vinyl. Really nice stuff. Having a professional paint/spray tint is still the superior/better way to go but this is a great alternative no permanent route as well. It’s has air channels throughout the back of it (Like any wrap film) which are visible when your up pretty close to it but from 5ft away you’d wouldn’t notice.

Ahhh, nice. Amazon? Link?