Lifted/Leveled 2021 - Postem Up

[olyelr]

Thanks! Looks like Chevy.com is only showing 6.2 with AAR for the 22 Z71.


EDIT: the 22 High Country does show available in 6.2 without AAR.

So maybe if you get the 6.2 with the z71 then you are forced to get the aar. They do stupid shit like that sometimes.

I would certainly check with someone besides just the online build site…those are notorious for being incorrect.

 

[RHStansbury]

Anyone running the RC level with stock rims and tires? I'm thinking about getting the level knocked out now, but feel like swapping tires at 300 miles is a bit ridiculous.

 

[sanman28]

So maybe if you get the 6.2 with the z71 then you are forced to get the aar. They do stupid shit like that sometimes.

I would certainly check with someone besides just the online build site…those are notorious for being incorrect.

That is correct. 6.2 z71 comes with AR for the time being…..that’s why I got the AT4. Wanted the high clearance front end and off road look and the 6.2 but without the air ride.

 

[R32driver]

Anyone running the RC level with stock rims and tires? I'm thinking about getting the level knocked out now, but feel like swapping tires at 300 miles is a bit ridiculous.

Depends what tires you got stock. Ours came with Continental Crosscontact LX 20 tires and they are junk IMO and had to go immediately. Ridge Grapplers that replaced them are SOOOOO much better

 

[sanman28]

Looks like THIS is the only "advertised" level for a magnaride non-air ride yukon.......anybody else see others?

My plan (for my AT4) is the 18" wheels off of the sierra AT4 from last year, powder coated black or brass, with 295/65/18 duratracks.....i hope a level will fit them. Better yet if somebody has done a 2" + and it worked. No idea how to tinker with the magnaride until i get the thing.
Perhaps a 285/60/20 on the stock rims if decide to keep them.


This High Country clearly has some lift....and all those have magneride.

 

[tedgen2]

Had a RC 2” in the front and 1” in the back installed today. Stock rims and offset with 285/65R20 Ridge Grapplers. ‘22 Yukon XL AT4 with no AR. Minor rubbing on the inside of the fender that I need to cut. What’s odd is that it sits around 1/2” higher in the front. May need to add another 1” in the back.

 

[olyelr]

Had a RC 2” in the front and 1” in the back installed today. Stock rims and offset with 285/65R20 Ridge Grapplers. ‘22 Yukon XL AT4 with no AR. Minor rubbing on the inside of the fender that I need to cut. What’s odd is that it sits around 1/2” higher in the front. May need to add another 1” in the back.

Hard to tell with the dark pics but looks like it sits level or slightly higher in the back.

Looks good to me! And i hate when they look like they are sagging ass

 

[tedgen2]

Hard to tell with the dark pics but looks like it sits level or slightly higher in the back.

Looks good to me! And i hate when they look like they are sagging ass

I can take some in the daylight tomorrow. Long day!

 

[RHStansbury]

Had a RC 2” in the front and 1” in the back installed today. Stock rims and offset with 285/65R20 Ridge Grapplers. ‘22 Yukon XL AT4 with no AR. Minor rubbing on the inside of the fender that I need to cut. What’s odd is that it sits around 1/2” higher in the front. May need to add another 1” in the back.

Looks fantastic! If I'm not mistaken, this is the first time I've seen someone run 285/65s with just the Rough Country lift. Are you just cutting felt/plastic, or is some metal going to have to go too?

 

[tedgen2]

Looks fantastic! If I'm not mistaken, this is the first time I've seen someone run 285/65s with just the Rough Country lift. Are you just cutting felt/plastic, or is some metal going to have to go too?

Just felt/plastic and not much at all.

 

[fntiger]

Looks like THIS is the only "advertised" level for a magnaride non-air ride yukon.......anybody else see others?

My plan (for my AT4) is the 18" wheels off of the sierra AT4 from last year, powder coated black or brass, with 295/65/18 duratracks.....i hope a level will fit them. Better yet if somebody has done a 2" + and it worked. No idea how to tinker with the magnaride until i get the thing.
Perhaps a 285/60/20 on the stock rims if decide to keep them.


This High Country clearly has some lift....and all those have magneride.

It’s possible. You can try contacting Hurst Autoplex

But apparently they don’t share their secrets.

Custom Lifted 2021 GMC Yukon For Sale in Hurst, TX | #7361A

View this customized 2021 GMC Yukon, from Hurst Autoplex. All of our custom trucks are lifted in house. Stock #7361A.

www.hurstautoplex.com

 

[olyelr]

It’s possible. You can try contacting Hurst Autoplex

But apparently they don’t share their secrets.

Custom Lifted 2021 GMC Yukon For Sale in Hurst, TX | #7361A

View this customized 2021 GMC Yukon, from Hurst Autoplex. All of our custom trucks are lifted in house. Stock #7361A.

www.hurstautoplex.com

It says its a 4” readylift with 295/60/20’s…

 

[RHStansbury]

It says its a 4” readylift with 295/60/20’s…

View attachment 360583

It does, but if you ask Readylift, they’ll tell you that they are not sure how Hurst is doing it. Hurst references a 4 inch kit which is what was available for the previous gen. They started selling their lifted 2021s before Readylift had anything on the market for the current gen.

 

[VAguy68]

Had a RC 2” in the front and 1” in the back installed today. Stock rims and offset with 285/65R20 Ridge Grapplers. ‘22 Yukon XL AT4 with no AR. Minor rubbing on the inside of the fender that I need to cut. What’s odd is that it sits around 1/2” higher in the front. May need to add another 1” in the back.

Did you use any wheel spacers? I see on the RC site where all three customer examples used 2.25" Bora spacers. Is this critical? I'd rather my tires not stick out past the fenders if possible.

 

[tedgen2]

I can take some in the daylight tomorrow. Long day!

Here are some more, think it sags a little but may not be noticeable enough to go add to the back. The 6.2 is nice!

 

[tedgen2]

Did you use any wheel spacers? I see on the RC site where all three customer examples used 2.25" Bora spacers. Is this critical? I'd rather my tires not stick out past the fenders if possible.

No wheel spacers.

 

[RHStansbury]

No wheel spacers.

Any chance we can get clearance/trimming pictures?

 

[sanman28]

Had a RC 2” in the front and 1” in the back installed today. Stock rims and offset with 285/65R20 Ridge Grapplers. ‘22 Yukon XL AT4 with no AR. Minor rubbing on the inside of the fender that I need to cut. What’s odd is that it sits around 1/2” higher in the front. May need to add another 1” in the back.

Awesome! And thank goodness for your info. Exactly my plan. Is it this kit you used?

Lift

 

[tedgen2]

Any chance we can get clearance/trimming pictures?

I’ll try later today. I trimmed about a 1” by 8” bottom piece of the felt on the front fender wells, that’s the only place I noticed it hitting at full lock. I will say - it is tight in there now!

 

[olyelr]

Here are some more, think it sags a little but may not be noticeable enough to go add to the back. The 6.2 is nice!

Looks good to me…and im a stickler for a saggin ass!

The 6.2 is a must in my opinion!