Broken Motor Mounts

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Scottydoggs

Full Access Member
Joined
Dec 16, 2017
Posts
2,880
Reaction score
4,513
Location
NJ
Because those mounts were solid rubber unlike the 07- up which are liquid filled. That's why the Hummer mounts are better replacements, they're solid rubber too.

that makes me feel better then, at least i didnt have unicorn mounts lol
 

NathanJax

Vacation Nathan
Staff member
Administrator Moderator Supporting Member
Joined
May 9, 2009
Posts
49,141
Reaction score
943,577,202
Location
Jax, Fl
Because those mounts were solid rubber unlike the 07- up which are liquid filled. That's why the Hummer mounts are better replacements, they're solid rubber too.

:word:
 

Kenny D

Full Access Member
Joined
Feb 5, 2017
Posts
1,236
Reaction score
1,283
Location
Crosby, Tx
On the Hummer mounts, are there really a difference in the left to the right other than the plate that is shown on Rockauto?
 

Ob1hybrid

Full Access Member
Joined
Nov 26, 2016
Posts
121
Reaction score
17
Reading these issues brings me to think I too may have a busted mount somewhere. I’ve had my 4 shocks replaced chasing a clunking sound when goin over rough terrain (NYC Roads) and I’ve literally been stopped by other Denali drivers asking about suspension issues. I’m starting to think it’s not the suspension but motor mount that’s causing headeaches. I remember I had a maxima and did the same thing, switched my suspension. I then changed my mounts and it was noise free. It’s important to tell the dealer to check mounts thoroughly.
 

NathanJax

Vacation Nathan
Staff member
Administrator Moderator Supporting Member
Joined
May 9, 2009
Posts
49,141
Reaction score
943,577,202
Location
Jax, Fl
On the Hummer mounts, are there really a difference in the left to the right other than the plate that is shown on Rockauto?

it's what's in between the plates. On the hummer it's just solid rubber. On ours there's a rubber pouch filled with hydraulic fluid.
 

miatawnt2b

TYF Newbie
Joined
Apr 4, 2017
Posts
28
Reaction score
7
I've been doing some I/T work for Phoenix Police Department, and I was talking to some of the Fleet Mechanics. They have an updated part number for a solid mount that they use. They were replacing mounts every 3-6000 miles prior to going with this new mount. They said you'll never have to replace another mount using this part.

25847739-B

-J
 

2010WhiteHoe

Member
Joined
Oct 27, 2011
Posts
44
Reaction score
8
Location
A Place Far Far Away
FrankU,

Thank you for the compliment! I am happy to be on the forum and ready at assist anyone who may have a general question or concern about any GM product.

Jennifer T.
GM Customer Care
TXMaverick,,

I am happy to hear that you were able to resolve your vehicle issue yourself. Please know that GM Customer Care is here and always happy to assist!

Jennifer T.
GM Customer Care



Can you contact me about a similar issue please.
 

NathanJax

Vacation Nathan
Staff member
Administrator Moderator Supporting Member
Joined
May 9, 2009
Posts
49,141
Reaction score
943,577,202
Location
Jax, Fl

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,678
Reaction score
52,943
Location
Oregon
That
I've been doing some I/T work for Phoenix Police Department, and I was talking to some of the Fleet Mechanics. They have an updated part number for a solid mount that they use. They were replacing mounts every 3-6000 miles prior to going with this new mount. They said you'll never have to replace another mount using this part.

25847739-B

-J
That's the Hummer one.
 

jz57

Full Access Member
Joined
Apr 24, 2012
Posts
217
Reaction score
88
Since Tahoe's driver-side engine mount problem has been solved by using Hummer H3's passenger-side one (25847739), how about Tahoe's passenger-side mount? Leave it unchanged or switch it to other GM part number? Or using same H3's one, GM # 25847739 ?
 

NathanJax

Vacation Nathan
Staff member
Administrator Moderator Supporting Member
Joined
May 9, 2009
Posts
49,141
Reaction score
943,577,202
Location
Jax, Fl
Since Tahoe's driver-side engine mount problem has been solved by using Hummer H3's passenger-side one (25847739), how about Tahoe's passenger-side mount? Leave it unchanged or switch it to other GM part number? Or using same H3's one, GM # 25847739 ?

Use the H3 passenger side for both of OUR sides.
 

08grey

Full Access Member
Joined
Jun 17, 2012
Posts
4,596
Reaction score
725
Does anyone know if this is the same for the 6.2?

Sent from my SM-G950U using Tapatalk
 

Forum statistics

Threads
137,702
Posts
1,990,017
Members
102,698
Latest member
JamesinAbilene

Latest posts

Back
Top