2016 yukon xl denali 4inch lift 4wd

[Joshb0718]

Plano, TX 4wp not plank tx, dam stupid smart phone


Sent from my iPhone using Tapatalk

 

[Adam10532]

what is your difference in height from the back Fender to the front fender by doing that what is your rake

 

[Joshb0718]

what is your difference in height from the back Fender to the front fender by doing that what is your rake

It’s within an inch which was better than the 2-2.5” difference at first! I’ll measure and check. Fabtech and 4wp kept telling me you have to use the body lines and not the fender gap, I feel like fender gap is what visually makes it look level and body lines are their way around fender gaps


Sent from my iPhone using Tapatalk

 

[Adam10532]

Plano, TX 4wp not plank tx, dam stupid smart phone


Sent from my iPhone using Tapatalk

and you still have the 3-inch spacer installed from the original fabtech in the rear ?

 

[Joshb0718]

and you still have the 3-inch spacer installed from the original fabtech in the rear ?

Have all parts of fabtech 4” budget + front lower spacers. No parts were removed or swapped to accommodate the lower part added


Sent from my iPhone using Tapatalk

 

[Joshb0718]

what is your difference in height from the back Fender to the front fender by doing that what is your rake

39.75” in the front and 40.5” in the rear. Measuring ground to center of fender. Not level but visually looks a lot better than the rear being crazy higher and the front looking stock/level and not “lifted”


Sent from my iPhone using Tapatalk

 

[Adam10532]

Have all parts of fabtech 4” budget + front lower spacers. No parts were removed or swapped to accommodate the lower part added


Sent from my iPhone using Tapatalk

I can't wait to do this to my suv I just had it leved by lowering the rear to a 1inch spacer man all this money wasted I have already had a 3 ,2 and now a one inch spacer

 

[Adam10532]

39.75” in the front and 40.5” in the rear. Measuring ground to center of fender. Not level but visually looks a lot better than the rear being crazy higher and the front looking stock/level and not “lifted”


Sent from my iPhone using Tapatalk

oh yeah looks real good nice job

 

[Adam10532]

oh yeah looks real good nice job

And if you ever can get a chance can you get a picture of the front CV angle I like to see how it looks thanks again

 

[Adam10532]

oh yeah looks real good nice job

is your suburban have autoride and or magnetic ride