2008 GMC Yukon "Regency" Edition Build Thread

[Blazed]

Well it's hard to tell you if it's hooked up right from that picture there are so many other places in the wiring that could be wrong.

 

[Regency]

Alright well I asked modded anyways

 

[Modded]

Alright thanks so everything looked correctly wired?

Kind of. It looks like the top two speaker terminal have just one wire going to them? Also, the bottom terminal have both side of the double stranded wire going to one terminal each. Is that to make up for a thinner gauge wire than you wanted?
It will need some cleaning up also but I know you already plan on that.

---------- Post added at 01:00 AM ---------- Previous post was at 12:59 AM ----------

Are you guys beefing?

 

[Blazed]

Apparently haha

 

[Regency]

I honestly have no clue it was already pre-wired so I just plugged the old wires in I'm taking it to the shop to just have them do it instead that way it'll be right

Haha no atleast I don't think so

 

[Modded]

Yeah that is your best bet Reg since the pics can only tell a certain amount.
You may have shorted the remote or power wire when you made the switch if you were not careful to make sure they did not touch the ground, or the body of the car. If that is the case, you have a fuse or two blown somewhere.

Also, since you guys have differing standpoints on a potential rivalry, the first one with 28s and a 3/5 drop wins lol.

 

[Regency]

Hired my friend to help me with details just finished up re-claying again to make sure it was completely de-contaminated and at 10 am tomorrow going to wash and then do some polishing charging up the flip and my DSLR for some help videos and photos tomorrow.

---------- Post added at 11:09 PM ---------- Previous post was at 11:08 PM ----------

Yeah that is your best bet Reg since the pics can only tell a certain amount.
You may have shorted the remote or power wire when you made the switch if you were not careful to make sure they did not touch the ground, or the body of the car. If that is the case, you have a fuse or two blown somewhere.

Also, since you guys have differing standpoints on a potential rivalry, the first one with 28s and a 3/5 drop wins lol.

Hmm alright I'm sure the shop could figure all of that out right?
Think I want to go to MIT to learn all of this and be my own shop.
And haha good one!

 

[Modded]

Yes the shop will definitely know which of those is presenting you with a problem if it is one of them.

 

[Regency]

Alright cool thanks man.

 

[RollTide2]

I ment to ask for a porter cable for Christmas. Is it well worth the buy?

 

[GalaxyBlackEsky]

^^ YES!! also that little Sidekick is great. Helps get all the water out of the cracks and also I never have to dry rims off.

 

[Regency]

Can you tell the difference???

 

[MACHO]

Can you tell the difference???

Absolutely!!! One photo is of one side of the Yukon and the second photo is the other side!

 

[Blazed]

Jeep...

 

[Regency]

Absolutely!!! One photo is of one side of the Yukon and the second photo is the other side!

Haha good one one side looks hazy and lightly oxidized then the side I polished with black light and a black pad is all glossy and amazing looking IMO I'm holding off on V30 series until me and you meet up and detail together then it'll be swirl free

---------- Post added at 02:41 PM ---------- Previous post was at 02:20 PM ----------

Jeep...

Atta kid



Got the complete fresh prince series!

 

[Blazed]

I used to watch those all the time but I have seen them all now but they were so funny

 

[Regency]

That's sick gotta love Will Smith

 

[Goodinblack]

Looks Great.

 

[Regency]

What question?
Just finished up.
Just finished will have to get better pics when daylight arrive tomorrow but for now here we go.
Before:

After:

Just some photos will get some more tomorrow tell me what you guys think.
Still have some light swirling as well but it did way better than I expected as this not being a full paint correction as said earlier.

 

[Modded]

I need a full detail from you! You have the Jeep looking icy!