Anyone else get a loud click when boards retract? Mine do, on both drivers and passenger sides.... silicone not quieting them down. Just started after my trip down to Florida.... piece of crap has 7500 miles on it....wtf....GM strikes again...
19 yuk denali xl auto running boards
- Thread starter PG01
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Mad Maxx
Full Access Member
Mine just have a Hum when they extend and retract.
Sometimes after puddle jumping, or during this past Winter, they had a small Grinding noise, but that was just from Sand & Dirt being in the Pivots. Hose them out, and they're all good.
Sometimes after puddle jumping, or during this past Winter, they had a small Grinding noise, but that was just from Sand & Dirt being in the Pivots. Hose them out, and they're all good.
swathdiver
Full Access Member
Bring it in and gripe and let them fix it Pete; and keep the Tahoe!
OP
OP
Ill get under and fix it....
I am keeping the hoe... until wifey says so anyway.....lmao....
swathdiver
Full Access Member
Ill get under and fix it....
I am keeping the hoe... until wifey says so anyway.....lmao....
I know, I hate having other people work on my stuff! Wish I had my own tire machines and alignment rack too!
Pivot
Full Access Member
- Joined
- Jul 2, 2017
- Posts
- 198
- Reaction score
- 142
They return to their previous positions (retracted or extended) when they sense too much resistance. Mine both do that occasionally, so I spray all the joints with Blaster Silicone Lubricant and they are fine for a long time after that. Of course, before spraying, make sure they are washed and not a bunch of sand and dirt caked up.
