01 Tahoe

[01mattehoe]

[/IMG]I just want to see what everyone thinks of my Tahoe so far. Any and all input appreciated. Let me know what I should do next.
So far I have a
-matte black vinyl wrap
- HID Headlights/ All LED tail lights and 3rd break light
- white LED interior bulbs
- custom ported box with 4 12's on 2,000 watts
- kenwood head unit
- polk audio co axle door speakers
-PA system to mess with people on the road

 

[godoy]

Looks good I really like the wrap. What color was the truck? just needs a lowering kit with 24s and bam it will look 100000x better

 

[01mattehoe]

It was Gold and im going to put 18's with more of an off road tire.

[/IMG]

---------- Post added at 10:55 PM ---------- Previous post was at 10:52 PM ----------

 

[Goodinblack]

I looked at the box and thought it said Power Gell. LOL.

Need rims.....bad.

Nice wrap though.

 

[Shane93nc]

Looks good! How long does the wrap last?

 

[01mattehoe]

Not sure how long the wrap lasts. I believe it has a 7 or so year warranty from fading or coming undone. when it comes time to replace and if I still have it I am going to use plasti dip.

 

[Shane93nc]

7 years is a pretty good warranty. I would also tint your rear tail lights to add to the look.

 

[01mattehoe]

That is an old picture I now have all smoked LED's in the back

 

[Mr.Jack]

Nice truck!

Is it 3M vinyl?
I am planning to do exactly the same with my truck.

What did they do with the doorhandles? Were they able to put vinyl there as well?
And how come the lower part of the bumber (where the fog lights are) does not have vinyl?

Do not lower or put on 24" wheels! Offroad look is much more awesome.

 

[01mattehoe]

I believe it is 3m vinyl. The bottom isn't wrapped because the surface is too rough and we had it wrapped but it looked horrible. Thanks for the compliments I'm eventually going to put a 6" suspension lift with 35" trail grapplers. And for the handles they are wrapped but it was extremely Hard to wrap around them and its kinda rough I would suggest plasti dip for the handles

 

[El Padroni]

I like the wrap. Like everyone said, some better wheels and meaty tires would make this look like its ready for the apocalypse!

 

[01mattehoe]

After the lift I do the lift what do you all think about a lighted roof rack maybe throw a spare tire up there?

 

[turq]

If you would rather not discuss, I understand, but I am curious what the cost of this was?

 

[01mattehoe]

If you would rather not discuss, I understand, but I am curious what the cost of this was?

the wrap was around $1000
the rims are just flat black spray paint till I have money for new ones
and all my audio was $2500
i also have smoked LED Tail lights they ran about $300
and my head lights are HID's the kit was between $150-$200

 

[Mr.Jack]

$1000 US is cheap. I have to pay three times as much here in Norway.

 

[R_Zachs]

Who did you go with for the wrap? Need indeed for my dodge i think looks good

W. Zacherle on the text machine using Tapatalk

 

[Blazed]

Looking good!
You should get a can of matte clear coat and hit your tails and blinkers to finish up the look!
If you wanted to go all out you could frost the back four windows possibly.

 

[01mattehoe]

I got the wrap done by my aunts boyfriend so I paid for material and a little labor

 

[Mr.Jack]

I see you did remove the side moldings. Did you have to do this for wrapping?
I was thinking about leaving the moldings, and just wrap over them.
Did the person who did this for you, say anything about that?

 

[Tacobender24]

you should do a t-bar crank, 3/4in rear coil spacers, 33x12.5x18 a/t or m/t tires, cold air intake and exhaust. i have a this setup and couldn't be happier