I have posted about loosing al lhe oil out of my '17 in another post. I am hoping I have dodged the bullit in that it is still running and seems to be doing fine after putting about 400 miles on it and changing the oil and filter twice. And a third filter as a little extra insurance. My question is about what pil pressure should I be seeing after it has warmed up? The needle sits just short of the 40 psi mark by a couple of pounds except when acceleratiing and then it will jump to about 45 psi. At hot idle, it sits jus a little over the 20 psi mark. Maybe about 20/22 psi. I have just never paid much attention to where it idles. Just usually notice it is running close to 40 psi on the road. What are some of the numbers you are seeing on your late models? I am just afraid it is just going to slowly go south on me. A local shop estimated about $7000 to go through it when it happens. Thanks