What did you do to your OBS GMT400 Tahoe/Yukon Today?

[Gzes]

Yea not too bad but thag cracked windshield must make annoying lines on the vid

 

[_Dylan_]

exactly what did you change? the second one looks worse to me.

First video didn't upload in HD on youtube. I also switched from 1080p@15fps to 720p@30fps so its doesn't look so jerky.

but license plates being readable is a big plus when ever possible.

Definitely.

I came across an article about the one I bought talking about how they often come out of focus and a tutorial on how you can adjust it. Mine seems out of focus right now.

Video of a few bad drivers on the way to radioshack to pick up an extra memory card. 16gb micro SD for $13 this weekend!!
http://www.youtube.com/watch?v=3E74hAfrABY&

 

[Gzes]

Damn it looks good. Yea gheres shit drivers everywhere. U got a link fot he cam i might oick it up aswell since ive seen what it can do now

 

[_Dylan_]

It was free shipping when I bought it. You have to be careful of non HD versions that look the same. PM me if you are going to buy one I'll I can probably tell you if its a HD version or not.
http://www.ebay.com/itm/170913340027?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

 

[SunlitComet]

uh you might want to learn to edit out the horn calls if you record an accident

---------- Post added at 10:13 PM ---------- Previous post was at 09:46 PM ----------

dylan i look at those video and i find some odd looks. i can believe a camera could go out of focus but the super imposed data below should not. at one point it looked like it all changed at the same time. i will look at others at there respective websites but the site you listed has something suspicious going on. a whois search produced a protected contact name and a phone number that appently is used in some scams for various thing so i am inclined not to trust it for now. thanks.

 

[slipping]

I was looking at some of the dvr cameras on amazon, some like 28$. Gonna look some more after work but I like it.

 

[slipping]

Out with the old

 

[noJeepshere]

I'll get to find out how well it deals with sitting for 2 weeks in the rain and snow and cold tomorrow. Haven't been home in all that time because I've been on a sea cruise

 

[clownracer]

did hubs/bearings/2500 calipers 1500 pads/rotors long saterday for sure

 

[Gzes]

Put the cattke guard on and cleaned the rims. Gotta get the aftermarket rear bumper on, tow package on and fill the gap on the front of the cattle guard its a lil too low but ill see at night how bad it bkocks the lights. Should be liek the hid retrofit cutoffs but ill see...

---------- Post added at 07:41 PM ---------- Previous post was at 07:11 PM ----------

Nvm i got it higher by adjusting it but still gotta get the cover for the gap and next on list is the spacers for the wheels and then flares

 

[slipping]

Put the cattke guard on and cleaned the rims. Gotta get the aftermarket rear bumper on, tow package on and fill the gap on the front of the cattle guard its a lil too low but ill see at night how bad it bkocks the lights. Should be liek the hid retrofit cutoffs but ill see...

Nvm i got it higher by adjusting it but still gotta get the cover for the gap and next on list is the spacers for the wheels and then flares

Looks good man! My daughter asked if your truck was from terminator. Hahaha!

 

[kaoticlife]

Paint the frame.....please!

sent from tapatalk2 using rabbit ears and aluminum foil.

 

[Gzes]

I am gonna be black. Lol scott. U want more pics to show her? I can get some tomorrow

 

[_Dylan_]

I think it would look much better with the bumper raised.

 

[Gzes]

And lose the protection from an impact? Id rather have it low and have he hoe survive a crash then lift it and it would crush in and kill everything in its path like the radiator, front end, even the engine. Besides i would have to cut the guards mount to fit i already tried to get it up there but no it wont work or be safe. Im jist gonna put diamond plate to cover the gap and itl be good

 

[SPLmonster13]

And lose the protection from an impact? Id rather have it low and have he hoe survive a crash then lift it and it would crush in and kill everything in its path like the radiator, front end, even the engine. Besides i would have to cut the guards mount to fit i already tried to get it up there but no it wont work or be safe. Im jist gonna put diamond plate to cover the gap and itl be good

In the event of a crash you're probably gonna have frame damage from that big heavy bumper being mounted to the frame anyways..just sayin

 

[Gzes]

Frame damage is better than ****** engine along with rest of the front end

 

[SPLmonster13]

Frame damage is better than ****** engine along with rest of the front end

Agree to disagree on that.

 

[Gzes]

Well best case senario if it is hit would be the mounting bolts snap and the guard gets pushed in for minimal damage and i hook up the guard to another truck and pull it out and reapir the damage. There is no best case senario if its using the bracket... Its for show only and would destroy the whole front end and kill the engine

 

[kaoticlife]

Slipping why don't you buy these from me?

sent from tapatalk2 using rabbit ears and aluminum foil.