What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Doubeleive]

I'm knocking on wood here talking about it, lol, but I've only ever replaced one radiator in the 6 vehicles that I currently own. That was in my Mustang, not because it leaked, but because of the bigger, supercharged engine I put in 15 years ago needing a bigger radiator.

My two highest mileage vehicles which were bought new, the 2001 Yukon with >250k miles and the 2002 Mustang GT with ~170k still on original radiators

the one in the 18 silverado is original as far as i know I bought it in 19 so it's fast approaching 5 years, it will probably be my next victim I have only had the water pump fail so far

 

[Doubeleive]

Parts came in

 

[madmanjustice]

Been a while since I have been on here. Finally got some new chonky tires for the Tahoe and also made time to install the GoRhino push bar. Which IMO was much more difficult to install than the Setina I had on my 2013 PPV. Next on the list of things to find time to do is getting rid of the badges and door moldings.

 

[CaptainAmerica1]

How long do TPMS sensors last? I bought "new" OEM ones at the last tire replacement 4 years ago, almost to the day. But I have no idea how long they sat in a warehouse prior to my purchase. Also, this is the same tire that just had the valve stem replaced a few weeks ago. Can these be screwed up by a sloppy tire jocky?

View attachment 407976

I ve replaced mine 4 times in 3 years. I give up.

 

[Doubeleive]

New fan connector

 

[Doubeleive]

Modified the baffles with a support bracket because I can't drive 55 so figured that might help keep them from collapsing

 

[Doubeleive]

Little test run, all systems go

 

[avalonandl]

Little test run, all systems go
View attachment 408080View attachment 408081

Avg speed 71.... max 132.... Your my hero ..... LOL

 

[Doubeleive]

Avg speed 71.... max 132.... Your my hero ..... LOL

had to make sure no lines or hoses were going to pop off and no leaks so that included 2 complete stops to check under the hood with a flashlight. The rest of the time was just warming it up and topping it off, double checking everything, putting tools away and cleaning up while it idled.

 

[Sparksalot]

Been a while since I have been on here. Finally got some new chonky tires for the Tahoe and also made time to install the GoRhino push bar. Which IMO was much more difficult to install than the Setina I had on my 2013 PPV. Next on the list of things to find time to do is getting rid of the badges and door moldings.
View attachment 408065View attachment 408066View attachment 408067View attachment 408068View attachment 408069

I hear ya. The GoRhino bar was much easier to install on my K2.

 

[Sparksalot]

Modified the baffles with a support bracket because I can't drive 55 so figured that might help keep them from collapsing View attachment 408079

 

[Doubeleive]

View attachment 408098

in my dreams

 

[pwtr02ss]

How long do TPMS sensors last? I bought "new" OEM ones at the last tire replacement 4 years ago, almost to the day. But I have no idea how long they sat in a warehouse prior to my purchase. Also, this is the same tire that just had the valve stem replaced a few weeks ago. Can these be screwed up by a sloppy tire jocky?

View attachment 407976

I lost one to a replacement valve stem last week myself. Worked fine, had the stem replaced. Sensor died on the way home. $75 later, new sensor installed and on the road again

 

[gooffeyguy]

Anyone else have an AutoSync for our vehicles?

Curious if you've tried the launch control feature. I haven't, and really have no need to, but am curious. Just afraid I might break something. The instructions give a warning....

 

[Doubeleive]

Anyone else have an AutoSync for our vehicles?

Curious if you've tried the launch control feature. I haven't, and really have no need to, but am curious. Just afraid I might break something. The instructions give a warning....

View attachment 408194

i would def break it

 

[Doubeleive]

bought a lot sale of wire loom, comes with some shrink tubing also
I see a lot of my loom is falling apart (crumbling) or has already vanished
seems like a decent deal ($35) for what is out there, couple lot's remaining

Pardon Our Interruption...

 

[iamdub]

bought a lot sale of wire loom, comes with some shrink tubing also
I see a lot of my loom is falling apart (crumbling) or has already vanished
seems like a decent deal ($35) for what is out there, couple lot's remaining

Pardon Our Interruption...

If it's the same stuff as that from Harbor Freight, I'd say it's good. I replaced a lot of mine with the HF stuff and it's holding up fine.

 

[CaptainAmerica1]

$19 shipping!

 

[Doubeleive]

$19 shipping!

Ya but you should what most of this stuff sells for even at the store, stupid prices for plastic

 

[rmaker]

I used the Chemical Guys Clay bar kit and started detailing the burb. Didn't get started till late in the day so only got half the truck clayed and waxed. What a difference though, its amazing how much better it's looks.