OP
OP
2004 6.0 NV4500 Tahoe
- Thread starter Dantheman1540
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Will they fit your huge shafts?bring those new rubbers
pwtr02ss
Full Access Member
Depends on what we're fitting where, but I think we/they can manageWill they fit your huge shafts?
iamdub
Full Access Member
I'll stream it on my OnlyFans for you.
pwtr02ss
Full Access Member
randeez
Full Access Member
mornin
OP
OP
Dantheman1540
Full Access Member
Not sure what other measurements you really need, the one with the tape is end to end distance. They are both the same thicccness but the hellwig is solid and the H2 is hollow.
Attachments
iamdub
Full Access Member
That width is my main concern. Thanks for getting that and the side-by-side pic. I'll compare my Hoe when it stops raining.
Tonyrodz
Resident Resident
Crocs....Them crocs tho..
Good info for a nice upgrade with an oem piece. Very nice
FYP
iamdub
Full Access Member
Them crocs tho..
Crocs....
Crocs make great metal working/welding shoes cuz they don't catch fire from cherries.
They melt though if a cherry stays put when it lands on them, Leather not so much.
iamdub
Full Access Member
Lol
I've caught static here before for wearing slides and Crocs while cutting and welding metal.
Lol. I just bought my first pair of Crocs.. I wear flip flops like 350 days a year, so figured they would give me slightly better traction on snow & ice..
George B
¯\_(ツ)_/¯
They do and the arch support is good. I resisted until the Wife bought me some. Not recommended for welding or cooking liquids tho.
randeez
Full Access Member
yea i usually wore some slip on redwings but very low around ankle...so many bbs fell into them
OP
OP
Dantheman1540
Full Access Member
Crocs solved my plantar fascism within a few weeks of wearing them instead of flip flops. I was on the verge of surgery because it had been well over a year with multiple foot injections and no relief! Plus I usually look ratchet on the weekends wearing camo cargo shorts, some random dirty old T shirt with holes, and used to be nasty feet in flops but now in crocs .
Fixed my endlink issue hopefully for the last time! To refresh everyone my Hellwig links had a female end fail by having the threads basically strip and with a small amount of force it would be able to compress and skip past the threads. Then I switched to the DJM endlinks but instead of moving the whole bar over and yada yada I just didn’t and an endlink broke I think when I snatched the amazon guy out of the sand a week or two ago.
So I went back to the hellwigs and added 2 nuts sandwiching a lock washer and welded the female half of the link to the lock nuts hopefully keeping it from moving freely. The welds look like shit because my argon bottle is below 100psi but I ground it down and it appears good enough.
Somehow I only took one pic
.Fixed my endlink issue hopefully for the last time! To refresh everyone my Hellwig links had a female end fail by having the threads basically strip and with a small amount of force it would be able to compress and skip past the threads. Then I switched to the DJM endlinks but instead of moving the whole bar over and yada yada I just didn’t and an endlink broke I think when I snatched the amazon guy out of the sand a week or two ago.
So I went back to the hellwigs and added 2 nuts sandwiching a lock washer and welded the female half of the link to the lock nuts hopefully keeping it from moving freely. The welds look like shit because my argon bottle is below 100psi but I ground it down and it appears good enough.
Somehow I only took one pic
Attachments
iamdub
Full Access Member
And they never slip off as easily during those moments.
randeez
Full Access Member
did someone say 2-nut sandwichCrocs solved my plantar fascism within a few weeks of wearing them instead of flip flops. I was on the verge of surgery because it had been well over a year with multiple foot injections and no relief! Plus I usually look ratchet on the weekends wearing camo cargo shorts, some random dirty old T shirt with holes, and used to be nasty feet in flops but now in crocs
Fixed my endlink issue hopefully for the last time! To refresh everyone my Hellwig links had a female end fail by having the threads basically strip and with a small amount of force it would be able to compress and skip past the threads. Then I switched to the DJM endlinks but instead of moving the whole bar over and yada yada I just didn’t and an endlink broke I think when I snatched the amazon guy out of the sand a week or two ago.
So I went back to the hellwigs and added 2 nuts sandwiching a lock washer and welded the female half of the link to the lock nuts hopefully keeping it from moving freely. The welds look like shit because my argon bottle is below 100psi but I ground it down and it appears good enough.
Somehow I only took one pic
