What did you do to your NBS GMT800 Tahoe/Yukon Today?

[AlejandroDinero]

This is about to go down in a minute..

Sent from my iPhone using Tapatalk

 

[915_Tahoe]

I'm just running lowering keys with the Crown Suspension kit. I just had my ucas done. It was easier then replacing just bjs or bushings. Went with Moog.

Did you go with oe fitment or the one that has the offset for degree

 

[Fless]

So, I couldn't leave well enough alone and I picked up some Chemical Guys Lightning Fast Carpet and Upholstery Stain Extractor to try to work out some of the spots that were left after the car wash guys steam cleaned the interior. So far it's lifted every spot I've used it on! I'm super impressed with this product and wanted to share my success with y'all in case anyone was looking for a good spot cleaner.

Might want to let your car wash detail guys know about it. They may be stuck with a certain brand of product but it might be an option for them to use.

 

[Tonyrodz]

Did you go with oe fitment or the one that has the offset for degree

Went with stock. https://www.amazon.com/dp/B00FJW6IK...abc_ZE1BH0TWEG43KDSHK2CP?_encoding=UTF8&psc=1

 

[blueinkd]

This is about to go down in a minute..

Sent from my iPhone using Tapatalk

What brand are these?? I still got a little soft spot for 3" spindle lift on mine. Getting rear main seal done tomorrow and then maybe around summer time

 

[Rocket Man]

So, I couldn't leave well enough alone and I picked up some Chemical Guys Lightning Fast Carpet and Upholstery Stain Extractor to try to work out some of the spots that were left after the car wash guys steam cleaned the interior. So far it's lifted every spot I've used it on! I'm super impressed with this product and wanted to share my success with y'all in case anyone was looking for a good spot cleaner.

I have some of that. I tried it on some spots in my headliner, worked fairly good iirc.

 

[AlejandroDinero]

What brand are these?? I still got a little soft spot for 3" spindle lift on mine. Getting rear main seal done tomorrow and then maybe around summer time

LAFORMO Silverado Sierra 3" Lift Spindles Knuckles Replacement for 2WD GM 1500 Truck SUV Chevy Silverado Sierra 1999 2000 2001 2002 2003 2004 2005 2006 2007 Lift Spindles Knuckles Suspension Level Kit https://www.amazon.com/dp/B08P2K4BV...abc_AX2VXSBJEFZDX5XA46MY?_encoding=UTF8&psc=1

That’s who I went with, I was I’m gonna do mine Tonight but decided to wait in to finish my gauges and do everything tomorrow


Sent from my iPhone using Tapatalk

 

[Tonyrodz]

LAFORMO Silverado Sierra 3" Lift Spindles Knuckles Replacement for 2WD GM 1500 Truck SUV Chevy Silverado Sierra 1999 2000 2001 2002 2003 2004 2005 2006 2007 Lift Spindles Knuckles Suspension Level Kit https://www.amazon.com/dp/B08P2K4BV...abc_AX2VXSBJEFZDX5XA46MY?_encoding=UTF8&psc=1

That’s who I went with, I was I’m gonna do mine Tonight but decided to wait in to finish my gauges and do everything tomorrow


Sent from my iPhone using Tapatalk

What gauges are you doing? Aftermarket?

 

[Rocket Man]

LAFORMO Silverado Sierra 3" Lift Spindles Knuckles Replacement for 2WD GM 1500 Truck SUV Chevy Silverado Sierra 1999 2000 2001 2002 2003 2004 2005 2006 2007 Lift Spindles Knuckles Suspension Level Kit https://www.amazon.com/dp/B08P2K4BV...abc_AX2VXSBJEFZDX5XA46MY?_encoding=UTF8&psc=1

That’s who I went with, I was I’m gonna do mine Tonight but decided to wait in to finish my gauges and do everything tomorrow


Sent from my iPhone using Tapatalk

Never heard of that brand. You trust them?

 

[ks03]

Never heard of that brand. You trust them?

Prices lower than dorman, what a steal

 

[NoReverseYukon]

Finally determined what is causing the belt squeaking. The damned power steering pump pulley needs to be adjusted out approx. 3/16". This was a new one for me - never had one move before. Tool to do the job arrives tomorrow. If it had to move it in, I could have just used a 3/8"-16 bolt, nut and washer. But at least the threads are in good shape for a solid bite.

 

[iamdub]

Finally determined what is causing the belt squeaking. The damned power steering pump pulley needs to be adjusted out approx. 3/16". This was a new one for me - never had one move before. Tool to do the job arrives tomorrow. If it had to move it in, I could have just used a 3/8"-16 bolt, nut and washer. But at least the threads are in good shape for a solid bite.

3/16" is a bit much, but I've aligned them with washers behind the accessory bracket. I don't know if they were deformed brackets or what.

 

[Rocket Man]

View attachment 274086 View attachment 274087
Prices lower than dorman, what a steal

I don’t know about you but I’m not putting either one of those brands in a place that requires removing the transmission in order to replace.

 

[wjburken]

I don’t know about you but I’m not putting either one of those brands in a place that requires removing the transmission in order to replace.

Agree. There is some money I can’t afford to save.

 

[ks03]

I don’t know about you but I’m not putting either one of those brands in a place that requires removing the transmission in order to replace.

But if you had to trust one... rear main or steering knuckle?

 

[915_Tahoe]

So this is after installing the lowering keys, 31" from the ground to the fender lip. A little low for me, might just max out the key to full lift.

 

[915_Tahoe]

@Tonyrodz
Sorry to bother so much, but what is the height on the front of yours from ground to fender lip. I have my appointment for the alignment at 2 but need to get this done before it. If I were to max out the keys on lift would that make the truck leveled with the rear

 

[Tonyrodz]

@Tonyrodz
Sorry to bother so much, but what is the height on the front of yours from ground to fender lip. I have my appointment for the alignment at 2 but need to get this done before it. If I were to max out the keys on lift would that make the truck leveled with the rear

I know it's in my build thread, but I don't have time to check it. Omw to the dr's and I'm starting to run late. I THINK the front is somewhere around 32"--but not positive, sorry. If you crank the keys up--I actually did it too--it'll bring the front up where you want it to be.

 

[915_Tahoe]

I know it's in my build thread, but I don't have time to check it. Omw to the dr's and I'm starting to run late. I THINK the front is somewhere around 32"--but not positive, sorry. If you crank the keys up--I actually did it too--it'll bring the front up where you want it to be.

Thank you, ill check you thread and good luck at the doctor's

 

[Rocket Man]

But if you had to trust one... rear main or steering knuckle?

Me? Neither.