PG01
Supporting Member
Hehe
See my post above....same place i send everyone...
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Hehe
sleep, it's not time to get up yetHehe
See my post above....same place i send everyone...
Im done, 3 hrs maxsleep, it's not time to get up yet
I used to do that for years, stay up till 2~4 then get up at 6, my sister calls me the energizer bunny, lolIm done, 3 hrs max
Not by choice, i just sleep ******. Wish i could sleep longer.I used to do that for years, stay up till 2~4 then get up at 6, my sister calls me the energizer bunny, lol
but for a couple years now I feel better if I get more sleep but i will alternate sometimes stay up late for a couple days then go to sleep earlier the next and catch up.
Do you have factory-installed headrests? That's the only option I've ever seen that plug location occupied by.i'm waiting for them to re-write the firmware again as of this morning, so if they cant make it work then I will have to patch in there, mine are all occupied (Denali) so I would have to patch into one of the connectors from behind
i have a 2012 yukon xl denali with every bell and whistle except power running boards, does not have headrest monitors but it does have dual rear folding screensDo you have factory-installed headrests? That's the only option I've ever seen that plug location occupied by.
If so, you can just tap into the wire populated at the pin 8 location.
If you don't have a wire from pin 8, pull the block and get it from the rear.