Will These Be OK?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

donjetman

Full Access Member
Joined
Oct 22, 2018
Posts
1,374
Reaction score
2,388
I found some used GMC 22" oem wheels and 285/45R22 tires. Will these fit ok in place of the 20" 275/55R20 currently on my 07 Yukon Denali?

22 in oem.jpg

22 oem.jpg
 

Geotrash

Dave
Supporting Member
Joined
Feb 16, 2018
Posts
5,711
Reaction score
13,651
Location
Richmond, VA
I found some used GMC 22" oem wheels and 285/45R22 tires. Will these fit ok in place of the 20" 275/55R20 currently on my 07 Yukon Denali?

View attachment 277983

View attachment 277984
Nice wheels!

They're very close in diameter 31.9" for the 20's vs 32.1" for the 22's, and very close in width: 10.8" vs 11.2". And having looked into this before, the offset should be the same.

Having seen others make a similar swap, I would have to say yes.
 

Murfs66

TYF Newbie
Joined
Apr 27, 2021
Posts
7
Reaction score
2
those will fit, but the offset is a little different and it might rub slightly on full turns when hitting dips. just trim if so. those are nice wheels
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
6,603
Reaction score
8,672
Check the difference in wheel offset. If the difference is minimal, than they should fit. I run a 305/50x20 tire on my 07 with a 31mm OEM offset, and while the clearance is small, I have no rubbing.
 

VDV18

Full Access Member
Joined
Aug 2, 2016
Posts
221
Reaction score
228
Grab them, no chance they'll rub.
 

91RS

Full Access Member
Joined
Nov 15, 2009
Posts
2,515
Reaction score
1,904
Location
GA
They will not rub at stock height. Tons of people use K2 wheels on the 900s.
 

Forum statistics

Threads
129,522
Posts
1,817,154
Members
92,736
Latest member
BattleTank
Top