What did you do to your OBS GMT400 Tahoe/Yukon Today?

[mattss90]

I painted my frame, leaf springs, A arms a low gloss black a few days ago and now I'm waiting for my new sun visors to come in the mail. The originals look horrid

 

[Harlech]

New shocks all around and iPod interface.

Sent from my iPhone using Tapatalk

 

[Tbruz]

Rebuilt my cooling system with a new radiator, new water pump, upper, lower and bypass hoses, new thermostat, heater hoses and heater control.
Used all AcDelco stuff and Prestone green antifreeze
Took my time and did it over Saturday and Sunday.
Tbruz

 

[SunlitComet]

dexcool man, dexcool.

 

[noJeepshere]

No Dexcool. Dexcool bad. Green good. Just don't mix the two.

 

[SunlitComet]

green bad, green bad. orange beautiful and shiny. Dex-cool is a better product that does less damage to aluminum parts. Also does not leave residual coatings and costs less to maintain for it lifespan. Remember Riley, Be one with the environment. And the vortec.

 

[Gzes]

Orange boo. Green good. Bought a motor for my little blazer earlier and had a buddy yank it it's 1 am and waiting for him to bring it. Gonna put all new gaskets on it and maybe new water and oil pump

 

[Goodinblack]

July 2015 Truck of the Month Nominations

http://www.tahoeyukonforum.com/forum/showthread.php?t=73424

 

[rabbiporkchop]

Looked at it in the garage and put it on the float charger. Haha

Which winch bumper do you have on the front?

 

[chaingun427]

Almost finished stripping the engine bay

Sent from my SAMSUNG-SM-G925A using Tapatalk

 

[SunlitComet]

Hydroboost now before reassembly.

 

[domer94]

swapped out the chrome nerf bars for these "I-boards" from ebay $130. I lucked out the bolted right up to the existing nerf bar mounts. I think they look much slicker and classier on the truck

 

[jerryjoe28]

decided to swap my starter before it went all the way out lol

 

[SunlitComet]

Lost it in a hospital parking lot but I will find it.

 

[chaingun427]

projects in progress

Sent from my SAMSUNG-SM-G925A using Tapatalk

 

[Goodinblack]

Vote for the JULY 2015 Truck of the Month

http://tahoeyukonforum.com/forum/showthread.php?t=73676

 

[SunlitComet]

no.

 

[Harlech]

Rebuilt my NP246, turned out to be easier than anticipated. Put in the housing wear plate though I didn't show any signs of wear, I am guessing someone replaced the rear housing at some point. But I don't have the can full of marbles sound anymore, which means if they replaced they housing the didn't replace the rear output bearing.

 

[Tom Joad]

Rebuilt my NP246, turned out to be easier than anticipated. Put in the housing wear plate though I didn't show any signs of wear, I am guessing someone replaced the rear housing at some point. But I don't have the can full of marbles sound anymore, which means if they replaced they housing the didn't replace the rear output bearing.

Did you add anything to protect the rear case?

 

[Harlech]

Did you add anything to protect the rear case?

Yeah, I threw a protector plate in there. Wasn't going to go that far without it. New bearings, chain, snap rings and clutch plates to boot.