What did you do to your OBS GMT400 Tahoe/Yukon Today?

[IRQVET]

I touched up the grill guard today with a quick sand job and some more spray-on bed liner. Definitely hid some flaws caused by my lack of experience with spray-on bed liners, today's touch up made a huge difference and I am very pleased with the outcome.

I've been visiting and re-visiting the Treadwright website today looking at mud tires, but I'm having trouble "pulling the trigger" so to speak. . . .

I'm torn between purchasing some tires for a set of 17 inch GMC wheels I already own, or going back to stock 16 inch wheels and getting tires for those. Either way, the rims that were on the truck when I got it HAVE TO GO !!

What to do, what to do . . . . .

 

[SunlitComet]

What kind??

Not ready to say yet until I see a tracking number first. For now I will just tease you all.

---------- Post added at 07:57 PM ---------- Previous post was at 07:56 PM ----------

Alright a clue. Geico piglet.

 

[DefendHawaii]

Well the lights are aimed waaaaaay to far down. Gotta get them up a bit more.

 

[SunlitComet]

No blinding others now.

 

[the big blue bus]

i resprayed my wheels and frame/wheel wells black. got myoil filter, changing it friday with 10w-30 mobil one. got new rag joint to replace friday maybe too and getting the console blank to install my rocker switches. picking up 35s wednesday and ordering lift keys and getting those in and it all aligned in the next week or so

 

[DefendHawaii]

No blinding others now.

Haha no I def am not "that guy" but they are waaaaay low I had the screw adjusted as far low and inwards as they will go and now can't see anything past about 20 feet. So going to adjust them up about 40% higher and see how that goes.

Today we drove it up to our 5th cabin to see about moving into of the weekend. It is about 50 miles away from Seattle. an hour long drive each way for my GF to go to work and about hour n 15 minutes for me to get to work down at Ft. Lewis.

 

[arb905]

I replaced the catalytic converters today and installed two 12" Cherry Bombs. The SES light is finally gone. Waiting on the delivery of the 2 1/4" hot rod exhaust kit so I can finally put dual exhaust on the Kon. Can't seem to find a shop anywhere near me that actually bends a custom exhaust.

 

[retorq]

Not ready to say yet until I see a tracking number first. For now I will just tease you all.

Alright a clue. Geico piglet.

Tease.

 

[qukon 95]

i got me a 96 dash $ 50.00 jnk yrd. i want to swap them in the spring but i will see how long the aurge to put it now will take.

it didn't take that long to get out there was no seats in it but taking
the wires off it took another hr. And there is no way to get that
air bag out.
plans;;;; heat the black duct where the radio goes so the rca's
have some room off my radio,paint the metal brackets,get L E Ds
for the instrument panel & the hvac control, may look into mounting
spks on the top & center spk.

 

[retorq]

I'm gonna start mine up and drive it to work here ... maybe order the B+M shifter linkage this weekend for the 4L60 tranny and put that truck mega shifter in this weekend ...

 

[LI99HOE]

Damn, I forgot there was a thread for the OBS trucks, and posted this also on another (I guess NBS) thread...

Finally put together my trailer hitch bike carrier.
I'm tired of cleanin' mud outta' the INSIDE of the truck.
Took it on the road to make sure I wouldn't lose it along the way.

 

[arb905]

Well Hot Rod kit arrived yesterday and today I pulled the Kon into the shop to finish the job. After 4 hours and a little cursing, the job is done. I'll post pics soon.

I originally wanted a typical dual rear exit exhaust but did a single side swept dual exhaust. Kon sounds awesome, kinda like a race car. Drives real nice too.

 

[ch4d]

Well got it out of the shop to lazy to drop the 3/4 tank and replace the sending unit because my fuel pump failed when i was all the way at the coast which is like 100+ miles so i picked it up yesterday.. tomorrow i may replace the o2 sensor which is failing bank 2 sensor 1.....

 

[retorq]

In the middle of a floor shifter install...

 

[AtomicHoe094]

yikes... have fun lol

 

[qukon 95]

thursday i put my oem wheels &tires back on tires
almost new the cooper 17" A/T tires was worn won't make it
through the winter and i don't have $660.00 to replace
them now . well after driving with the oems and i parked
i notice the wheels are leaning the toe is off so sat took it

too dobbs for wheel aligment he couldn't do it the gear
box has play and idler arm is bad i got the gear box in jan
2011 from autozone this sucks but a lifetime warranty

i pulled it out too put the other one in plus a new pit arm
and idler arm. i will take it back mon and see what happens.

 

[vtx1800sba]

thursday i put my oem wheels &tires back on tires
almost new the cooper 17" A/T tires was worn won't make it
through the winter and i don't have $660.00 to replace
them now . well after driving with the oems and i parked
i notice the wheels are leaning the toe is off so sat took it

too dobbs for wheel aligment he couldn't do it the gear
box has play and idler arm is bad i got the gear box in jan
2011 from autozone this sucks but a lifetime warranty

i pulled it out too put the other one in plus a new pit arm
and idler arm. i will take it back mon and see what happens.

Gave my little red hoe a bath on Friday. Looks purdy.

 

[BattelWagun]

Damn, I forgot there was a thread for the OBS trucks, and posted this also on another (I guess NBS) thread...

Finally put together my trailer hitch bike carrier.
I'm tired of cleanin' mud outta' the INSIDE of the truck.
Took it on the road to make sure I wouldn't lose it along the way.

I just bought a PVC formed mat for the back of my truck. I USED TO have a hitch mount rack, but apparently my treck 4300 was worth the work of removing my hitch carrier....

you downhill bike?

 

[LI99HOE]

I just bought a PVC formed mat for the back of my truck. I USED TO have a hitch mount rack, but apparently my treck 4300 was worth the work of removing my hitch carrier....

you downhill bike?

I pretty much use it for all trails. We got lots of 'em where I live. There's even a few black diamond trails here and there.

Sucks they stole ur bike man.

 

[Sp1nn3y]

Today i paint the grill, some undercoating, find jack stands for rim painting..

also thinking of a few other things..