What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Rocket Man]

Does someone make these in CF?

No. i would have seen one by now if they had.

 

[5strmtrp]

Pennsylvania laws are rough, and BS!

That’s why we here in the great Commonwealth of Pensyltucky have different laws than a state. Slash a tire, pushing up daisy’s or mushrooms. But kill a man get a slap on the wrist and put you go. LOL

 

[Tonyrodz]

That’s why we here in the great Commonwealth of Pensyltucky have different laws than a state. Slash a tire, pushing up daisy’s or mushrooms. But kill a man get a slap on the wrist and put you go. LOL

I never knew the difference between a commonwealth and an incorporated state til I lived there. I don't want to sound like I'm talking smack, but believe me--I'll never step foot in Pa--EVER! They should put a sign up as soon as you hit Pa---
Come on vacation
Leave on probation
Come back on violation!
Yup!

 

[5strmtrp]

I never knew the difference between a commonwealth and an incorporated state til I lived there. I don't want to sound like I'm talking smack, but believe me--I'll never step foot in Pa--EVER! They should put a sign up as soon as you hit Pa---
Come on vacation
Leave on probation
Come back on violation!
Yup!

Yikes, we’re not a communist state, but there are laws that incorporated states don’t have and vice versa. Your what an hour or so from Easton area? If so I can seek ya over from one side to the other on a boat! LOL

 

[alpha_omega]

Thats what I'm here for, to help out the community.

Dealers say they can't give out gm #'s but it's more like won't, it'll be a lost sale for them. It’s like if your just giving out the answers during a test.

The thing about it was I already had the p/n for 99% of it.

Here is the real kicker.
Front coil springs p/n 20842473
(last 8 BR245859)

So what to do next considering none are available. Only two show up in the whole country (MO and NC) - I called and both are spoken for. Also, there were no other p/n’s listed which superseded them nor any others for cross reference.

Does anyone who lives further south or anywhere things dont rust have any local LKQ/yards they recommend for a set of front coils?
I have all new struts, mounts, hardware, insulators…etc so the options are:

1. Try finding a different coil that fits without throwing off the feel of the ride.
2. Try to return the newly purchased struts and all of the hardware, then look for an aftermarket set?
3. Buy a pre-assembled unit that isn’t cheaply built.


Any suggestions gents? I have no need to lift the vehicle. It could potentially be lowered, but I would have to adjust the rear as well so I don’t end up with the “Carolina lean”.

 

[alpha_omega]

I worked on increasing my carbon (fiber) footprint, lol.
The center stack surround was pretty easy. The console lid was trickier. Surprisingly I was able to cover it in one piece. Just seven more pieces to go.

Get in line folks, soon he will be taking orders!

 

[Tonyrodz]

Yikes, we’re not a communist state, but there are laws that incorporated states don’t have and vice versa. Your what an hour or so from Easton area? If so I can seek ya over from one side to the other on a boat! LOL

I was in the Poconos, then I lived in Bushkill, right up the road to Bushkill Falls. Went through a really bad marriage. Separated and I moved to Milford--Pike county. That county is everything that you've ever read about a communist country. If I was in NJ what happened to me in Pa never would've happened because it was such a blatant lie. I don't want to get into it anymore, but doesn't the law say it has to prove you're guilty, not that you have to prove your innocence? Hmmm.....I USED to be in law enforcement in NJ.

 

[alpha_omega]

I was in the Poconos, then I lived in Bushkill, right up the road to Bushkill Falls. Went through a really bad marriage. Separated and I moved to Milford--Pike county.

I drove through there once. I won’t ever make that mistake again. The only visit to that state I can’t control is a layover if I’m flying somewhere.

 

[Tonyrodz]

I drove through there once. I won’t ever make that mistake again. The only visit to that state I can’t control is a layover if I’m flying somewhere.

Yup. I have nothing but bad memories there. I will say the foliage is beautiful in the fall. That's it.

 

[5strmtrp]

Yup. I have nothing bad bad memories there. I will say the foliage is beautiful in the fall. That's it.

Sorry to bring up the bad, had similar issues when I lived near Syracuse and Rochester NY. Hear it’s good not great but good. Looking to retire up north of here on the Delaware.

 

[alpha_omega]

To sum up [yet another…I know] long ass post from earlier - it was meant to be a private message.

Who has changed out their front struts/coils and has had good luck with the build quality, the fit/finish, and most importantly the ride. Also, did you have to change both the front and rear coils so the vehicle rode better, or did you do so for aesthetics.

Brand/Part Number?

 

[swathdiver]

To sum up [yet another…I know] long ass post from earlier - it was meant to be a private message.

Who has changed out their front struts/coils and has had good luck with the build quality, the fit/finish, and most importantly the ride. Also, did you have to change both the front and rear coils so the vehicle rode better, or did you do so for aesthetics.

Brand/Part Number?

We recently did the front and rear on the Yukon XL, huge difference in ride quality and she's not sagging anymore, went with all GM OE parts. It'll ride even nicer when we get done with the replacing the tie rods, get it aligned and put some new tires on it.

 

[Doubeleive]

To sum up [yet another…I know] long ass post from earlier - it was meant to be a private message.

Who has changed out their front struts/coils and has had good luck with the build quality, the fit/finish, and most importantly the ride. Also, did you have to change both the front and rear coils so the vehicle rode better, or did you do so for aesthetics.

Brand/Part Number?

I replaced the shock portion of the strut, that's all you have to do that's the only part that goes bad
just get the old part number off the shock and punch the number into rock auto, they have new oem ones. lifetime warranty

 

[5strmtrp]

To sum up [yet another…I know] long ass post from earlier - it was meant to be a private message.

Who has changed out their front struts/coils and has had good luck with the build quality, the fit/finish, and most importantly the ride. Also, did you have to change both the front and rear coils so the vehicle rode better, or did you do so for aesthetics.

Brand/Part Number?

I changed out my fronts with the Monroe kit from rock auto. Easy to do, no ride issues with them after 2 years close to 35xxx miles. The rears changed the shocks out as well. The springs were and are still good.

 

[Charlie207]

I added a pair of kayak racks to the roof, so I can finally go kayaking with my gf.

 

[alpha_omega]

We recently did the front and rear on the Yukon XL, huge difference in ride quality and she's not sagging anymore, went with all GM OE parts. It'll ride even nicer when we get done with the replacing the tie rods, get it aligned and put some new tires on it.

I don’t think that option (GM OE) is going to be available for me. Not unless I use a different GM part.

I replaced the shock portion of the strut, that's all you have to do that's the only part that goes bad
just get the old part number off the shock and punch the number into rock auto, they have new oem ones. lifetime warranty

I wish that were the case…see attached photos

I have a stubbornness that’s usually unwilling to ask for help. If those options of just ordering the new parts and slapping it in there were available I wouldn’t have reached out. OEM is really the only way to go especially given the ride of the Denali, but the lack of coils springs is the issue.

 

[the_tool_man]

Does someone make these in CF?

I don't think so. The geometry on the back side of most of these pieces would be very difficult to reproduce. For example, the center stack surround has nine metal clips holding it in place, each of which requires a big tab on the back of the piece. The best you could hope for is CF laminated to a plastic molded part, I think. All that said, I probably wouldn't pay what real CF parts would cost anyway. The 3M vinyl is pretty convincing, and far more affordable.

 

[Rocket Man]

I don't think so. The geometry on the back side of most of these pieces would be very difficult to reproduce. For example, the center stack surround has nine metal clips holding it in place, each of which requires a big tab on the back of the piece. The best you could hope for is CF laminated to a plastic molded part, I think. All that said, I probably wouldn't pay what real CF parts would cost anyway. The 3M vinyl is pretty convincing, and far more affordable.

It might be convincing if you’ve never had the real thing before. I had a Harley Davidson V-Rod with all CF body parts. The stuff looks amazing. The wrap? It looks like a picture of CF. It looks better than the fake wood but it’s nothing close to real carbon fiber, which has depth. It is expensive though.

 

[915_Tahoe]

The thing about it was I already had the p/n for 99% of it.

Here is the real kicker.
Front coil springs p/n 20842473
(last 8 BR245859)

So what to do next considering none are available. Only two show up in the whole country (MO and NC) - I called and both are spoken for. Also, there were no other p/n’s listed which superseded them nor any others for cross reference.

Does anyone who lives further south or anywhere things dont rust have any local LKQ/yards they recommend for a set of front coils?
I have all new struts, mounts, hardware, insulators…etc so the options are:

1. Try finding a different coil that fits without throwing off the feel of the ride.
2. Try to return the newly purchased struts and all of the hardware, then look for an aftermarket set?
3. Buy a pre-assembled unit that isn’t cheaply built.


Any suggestions gents? I have no need to lift the vehicle. It could potentially be lowered, but I would have to adjust the rear as well so I don’t end up with the “Carolina lean”.

There is 1 dealer that has the old gm#25909352, but only 1 coil.
Baker Cadillac Oldsmobile Inc.
(978)534-6566
On my locator they have it listed at -65% of cost. Dealer cost is $65.46, but you didn't get this info from me.

 

[Sparksalot]

I worked on increasing my carbon (fiber) footprint, lol.

View attachment 349139

View attachment 349140

The center stack surround was pretty easy. The console lid was trickier. Surprisingly I was able to cover it in one piece. Just seven more pieces to go.

Did you hug a tree to offset this?