What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Tonyrodz]

I keep forgetting I need to fix my passenger side mirror gear. Always annoying when I’m going down the freeway and it flaps a little bit.

Sometimes with the powerfold mirrors, when they shake at speed, you need to push them out, then bring them back til they click. Kind of locks them back into place. Works with the nbs mirrors.

 

[Doubeleive]

Really, you need 4-8 rolls a day? I think you’re building a TP retirement nest lol.

I have 4 kids in the house and they get stupid with TP but we don't go thru 4 rolls a day, lol

thinking about doing the mirror gear today since the weather is nice

 

[swathdiver]

Really, you need 4-8 rolls a day? I think you’re building a TP retirement nest lol.

Mark, when my mother-in-law lived with us I was going through 36 rolls every ten days! Even my girls together use nowhere near that! LOL

Boy, I'm looking right now for wipes too, and the stores are wiped out! Pun intended!

 

[Rocket Man]

Mark, when my mother-in-law lived with us I was going through 36 rolls every ten days! Even my girls together use nowhere near that! LOL

Boy, I'm looking right now for wipes too, and the stores are wiped out! Pun intended!

What the hell was she doing, burning it in the fireplace to keep warm?

 

[Doubeleive]

Mark, when my mother-in-law lived with us I was going through 36 rolls every ten days! Even my girls together use nowhere near that! LOL

Boy, I'm looking right now for wipes too, and the stores are wiped out! Pun intended!

I bought a 8 pack 3-4 days ago off amazon for the baby it was $14, just looked again right now it's $50

 

[swathdiver]

What the hell was she doing, burning it in the fireplace to keep warm?

No, she was stuffing the septic tank, thought the Rotor Rooter guy looked cute or something! All joking aside, she had more plumbing problems than me and used to ball up the tp instead of taking measured sheets for use. They all do it, wrap a ton up around their hands, most inefficient!

 

[kbuskill]

No, she was stuffing the septic tank, thought the Rotor Rooter guy looked cute or something! All joking aside, she had more plumbing problems than me and used to ball up the tp instead of taking measured sheets for use. They all do it, wrap a ton up around their hands, most inefficient!

Must be a woman thing... my wife does the whole hand wrapping thing too, drives me nuts... lol

I take a measured amount and fold it neatly in half and then in half again before using it... very neat and orderly and symmetrical.

 

[swathdiver]

Must be a woman thing... my wife does the whole hand wrapping thing too, drives me nuts... lol

I take a measured amount and fold it neatly in half and then in half again before using it... very neat and orderly and symmetrical.

Yep! My grandfather taught me when I was a little boy, take six sheets and fold in half and then 1/2 again and fold one sheet up for extra thickness! LOL It works though, no mess and 24 sheets or less and done compared with what seems like a whole roll for the girls!

So no work on the truck yet, talking toilet paper and wipes! LOL, strange times we live in!

 

[Kee Fuller]

Remember how i mentioned a while back that i have a popping noise whenever i turn right or back in turning right?

Checked the right stabilizer link and it was so loose i could hand turn it. Tighten it up and it still pops. All the bushings are still there, but i went ahead and order Moog links for both sides and sway bar bushings for the front and rear.

Looked behind the front wheel hubs and my goodness its dirty and greasy back there. Literally caked on stuff.

 

[Tonyrodz]

Remember how i mentioned a while back that i have a popping noise whenever i turn right or back in turning right?

Checked the right stabilizer link and it was so loose i could hand turn it. Tighten it up and it still pops. All the bushings are still there, but i went ahead and order Moog links for both sides and sway bar bushings for the front and rear.

Looked behind the front wheel hubs and my goodness its dirty and greasy back there. Literally caked on stuff.

Are you slinging grease from the cv axles?

 

[Kee Fuller]

Are you slinging grease from the cv axles?

Axels are dry as a bone

 

[Kee Fuller]

Oh yea and I got water sloshing from my rear passenger door. Didnt noticed til i saw water dripping onto the running board. Lifted the stripping from the door and water came rushing out. Stripping doesnt look bad either. This is a first.

 

[Tonyrodz]

Oh yea and I got water sloshing from my rear passenger door. Didnt noticed til i saw water dripping onto the running board. Lifted the stripping from the door and water came rushing out. Stripping doesnt look bad either. This is a first.

Gotta pull those lower plastic drain plugs. They're underneath the door. Water gets past the rubber window sweep and collects at the bottom of the door. Somewhat normal.

 

[mikeyss]

I finally got one!!

And it's just in time... The L9H is giving me a hesitation/stumble only when it's cold and breathing on the pedal. There's No CEL, but at least now I will be able to see what the O2 sensors and MAF are doing.

 

[Rocket Man]

I finally got one!!
View attachment 243363

And it's just in time... The L9H is giving me a hesitation/stumble only when it's cold and breathing on the pedal. There's No CEL, but at least now I will be able to see what the O2 sensors and MAF are doing.

That tool should keep you busy for awhile.

 

[Kee Fuller]

Gotta pull those lower plastic drain plugs. They're underneath the door. Water gets past the rubber window sweep and collects at the bottom of the door. Somewhat normal.

The plugs are the rivets that hold the seal in place? Pop em out so they are sitting flush?

 

[Kee Fuller]

I finally got one!!
View attachment 243363

And it's just in time... The L9H is giving me a hesitation/stumble only when it's cold and breathing on the pedal. There's No CEL, but at least now I will be able to see what the O2 sensors and MAF are doing.

Get ya a harbor frieght case. Also double check to see if ya power car adapter works. Mine powers up, but doesn't produce enough power to turn the tech 2 on. Its not a big deal, i use the the battery clip one

 

[mikeyss]

Get ya a harbor frieght case. Also double check to see if ya power car adapter works. Mine powers up, but doesn't produce enough power to turn the tech 2 on. Its not a big deal, i use the the battery clip one

I'm going to go play with it soon and make sure it Powers up and stuff. I will report back. This clone came from CA and says made in USA, but who knows, haha

 

[mcislak]

Installed a compustar remote start with the drone option to use my phone for lock unlock and start. Much better range than the factory remote and my key ring is slimmer


Sent from my iPhone using Tapatalk Pro

 

[kbuskill]

I finally got one!!
View attachment 243363

And it's just in time... The L9H is giving me a hesitation/stumble only when it's cold and breathing on the pedal. There's No CEL, but at least now I will be able to see what the O2 sensors and MAF are doing.

Jelly