What did you do to your NNBS GMT900 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tarashoe08

TYF Newbie
Joined
Mar 10, 2017
Posts
11
Reaction score
16
F me... gave my hoe a full detail and some love and when I'm wiping my dash I see the one thing I've seem to have avoided....DASH CRACK :((( it's less then an inch but now I'm pissed!
 

Fosscore

Full Access Member
Joined
Apr 16, 2014
Posts
10,867
Reaction score
19,757
F me... gave my hoe a full detail and some love and when I'm wiping my dash I see the one thing I've seem to have avoided....DASH CRACK :((( it's less then an inch but now I'm pissed!

I have 3 cracks by the passenger side airbag and I am less than 20K.
:mad::flamingdevil:

I feel your pain.
 

Tarashoe08

TYF Newbie
Joined
Mar 10, 2017
Posts
11
Reaction score
16
I have 3 cracks by the passenger side airbag and I am less than 20K.
:mad::flamingdevil:

I feel your pain.
Ouch! I'm at 140k and just got the first one so I guess I'm lucky. I wonder if whether has something to do with it too. If owners with extreme heat and cold are more prone , I live in the Bay Area so the weather isn't too extreme. either way it shouldn't happen but there's nothing I can do about it now


Sent from my iPhone using Tapatalk
 

Fosscore

Full Access Member
Joined
Apr 16, 2014
Posts
10,867
Reaction score
19,757
S. Florida so no extreme cold and always heat lol. Known defect, many threads and complaints but no actual GM safety bulletin that I know of.

Some guys have changed out but pricey. Most just live with it and ignore as best can.
 

DaRosa218

The Dude abides
Joined
Jul 30, 2010
Posts
993
Reaction score
787
Location
Modesto, California
IMG_4435.JPG
Hmmm, something looks new. Continuing the build, promise I'll post full pics when it's finally done. Until then, here's a teaser pic.
 

Jackle1886

Member
Joined
Mar 4, 2017
Posts
38
Reaction score
41
Pulled a trailer full of pine firewood and old pallets to burn. Wife got us 60gal of sap and we are making syrup.


Sent from my iPhone using Tapatalk
 

Snacky

Full Access Member
Joined
May 11, 2014
Posts
241
Reaction score
26
Replaced the sway bar links and the brake switch.

No more clank noise over bumps, she's cornering like I never knew she could, and I have cruise control again.

All for less than 60 bucks and an hour of install time. All of the knowledge to make these fixes came from the TYF. Thanks TYFers!!!
 

denalianyone

NYBlackLade08
Joined
May 4, 2009
Posts
919
Reaction score
77
Location
New York
I have 3 cracks by the passenger side airbag and I am less than 20K.
:mad::flamingdevil:

I feel your pain.

Will the caddy dash fit on your truck? May need to look into that. I have an 08 and no dash crack since owning it.


Sent from my iPhone using Tapatalk
 

denalianyone

NYBlackLade08
Joined
May 4, 2009
Posts
919
Reaction score
77
Location
New York
Replaced the sway bar links and the brake switch.

No more clank noise over bumps, she's cornering like I never knew she could, and I have cruise control again.

All for less than 60 bucks and an hour of install time. All of the knowledge to make these fixes came from the TYF. Thanks TYFers!!!

What symptom was the brake switch showing?


Sent from my iPhone using Tapatalk
 

NGAneer

Full Access Member
Joined
Jan 21, 2014
Posts
1,785
Reaction score
1,023
Location
NWGA
Got mine to 10 bucks from Walmart online if you can beleive it. Made a huge difference in how quick my brake lights illuminate.

Before, I could hold a brake just a tiny bit and the 3rd would illuminate but not the tails.
 

DaRosa218

The Dude abides
Joined
Jul 30, 2010
Posts
993
Reaction score
787
Location
Modesto, California
Replaced both front brake calipers and now can't get proper brake pressure. It's a monsoon out here so she's parked until weather behaves. I also replaced the brake fluid via drawing it out of my Vacuum bleeder that hooks up to by air-compressor and still can not get the brake pressure that I had prior to my Driver side brake caliper freezing up on me. Oh the woes of owning this truck so far! LMAO
 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,825
Reaction score
9,836
Location
NE. FL.
Replaced both front brake calipers and now can't get proper brake pressure. It's a monsoon out here so she's parked until weather behaves. I also replaced the brake fluid via drawing it out of my Vacuum bleeder that hooks up to by air-compressor and still can not get the brake pressure that I had prior to my Driver side brake caliper freezing up on me. Oh the woes of owning this truck so far! LMAO

Anytime there is a chance of getting air in the brake lines you are supposed to bleed the abs pump by hooking up something like a tech2 scanner and activating the ABS pump... It will pulse and cause the air to move further down the line out of the pumps body and then you bleed it out at the caliper.

If you don't have a computer to perform this task you can do it the "redneck"/"shade tree" mechanic way....

Step 1.Find a dirt or gravel road

Step 2. Drive your truck above 30 MPH.

Step 3. Slam on your brakes so that the ABS pump engages. Do this a few times. Truck must be above 30 MPH.

Step 4. Bleed brakes.

Step 5. Repeat steps 2 - 4 until brake pedal is firm and air stops coming out of calipers upon bleeding.
 

DaRosa218

The Dude abides
Joined
Jul 30, 2010
Posts
993
Reaction score
787
Location
Modesto, California
Anytime there is a chance of getting air in the brake lines you are supposed to bleed the abs pump by hooking up something like a tech2 scanner and activating the ABS pump... It will pulse and cause the air to move further down the line out of the pumps body and then you bleed it out at the caliper.

If you don't have a computer to perform this task you can do it the "redneck"/"shade tree" mechanic way....

Step 1.Find a dirt or gravel road

Step 2. Drive your truck above 30 MPH.

Step 3. Slam on your brakes so that the ABS pump engages. Do this a few times. Truck must be above 30 MPH.

Step 4. Bleed brakes.

Step 5. Repeat steps 2 - 4 until brake pedal is firm and air stops coming out of calipers upon bleeding.

Awesome, thank you sir!
 

Fosscore

Full Access Member
Joined
Apr 16, 2014
Posts
10,867
Reaction score
19,757
Will the caddy dash fit on your truck? May need to look into that. I have an 08 and no dash crack since owning it.
Sent from my iPhone using Tapatalk

Not sure. Thankfully the wife drives it so I only have to look at it while cleaning it or on the weekends when the family heads out and I'm driving. :)

Love that HD hood. Wish they had one similar for the NNBS trucks!?!
Sent from my iPhone using Tapatalk

Yessir. The HD hood is a winner with that easy swap for the NBS Tahoes/Suburbans.
 

Forum statistics

Threads
137,780
Posts
1,992,133
Members
102,777
Latest member
wwiizz

Latest posts

Back
Top