What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Tonyrodz]

So what exactly happened- whatever it was it sounds like he didn’t check shit out first. Goddammmit.

Yeah, I'd say so. He used the old heads. I'm gonna see how this plays out and what he says. I think it's his fault too.

 

[Rocket Man]

Yeah, I'd say so. He used the old heads. I'm gonna see how this plays out and what he says. I think it's his fault too.

Didn't he put new valve seals in? Maybe he didn’t get the valves installed right, keepers not locked or something? Seems fishy to me.

 

[mattbta]

Once again, they want pictures. Anxiously awaiting their response.

 

[Tonyrodz]

Didn't he put new valve seals in? Maybe he didn’t get the valves installed right, keepers not locked or something? Seems fishy to me.

I have no clue what he did. The more I'm thinking about it the madder I'm getting. I really, really hope he doesn't tell me any ******** about me having to pay extra now. I'm simmering over here. Totally not my fault, so why should I pay?

 

[Sam Harris]

That is an option, the Sierra's never had a front mounting bracket change AFAIK unlike the 03-07 Silverado's,it should be a direct bolt on.

Thanks man! So just the valance would bolt on? Or do I need to swap the bumper as well?

 

[Doubeleive]

Working on it, got the steering wheel controls working and backup cam going, now for the amps...

 

[Doubeleive]

The Z71 Valance will not be a direct fit to Yukon bumpers,the Valance has a different shape on the Tahoe/Burban bumpers compared to Yukon's.Some trimming would definitely be needed. A Denali bumper would be your best bet for rounded fogs, prices of of the Valance and the Bumper are about the same,at least what ive seen in my area.

so will it go on a suburban then direct fit?

 

[Rocket Man]

View attachment 257025 Working on it, got the steering wheel controls working and backup cam going, now for the amps...

View attachment 257025

So much fun lol.

 

[Mezzo]

so will it go on a suburban then direct fit?

Yes it will man!

 

[Mezzo]

Thanks man! So just the valance would bolt on? Or do I need to swap the bumper as well?

You would need the front bumper from a Sierra that has the rounded fog lamps.

 

[Doubeleive]

So much fun lol.

ya.... roadblocks every 5 minutes going to take me all day

 

[Mezzo]

I say that yet I

Thanks man! So just the valance would bolt on? Or do I need to swap the bumper as well?

https://www.tahoeyukonforum.com/threads/2003-sierra-bumper-grille-swap.16635/

Someone here has done it before,it does look more involved though than I lead you to believe my apologies, still it is possible if you are willing to go the extra mile to make it work.
From what im gathering you would need to cut the frame horns(like how cat eye swaps for tahoes are) and weld the ones from the sierra for the new fitment,then it is bolt on.I guess this is the cat eye swap of the Yukon world :/

 

[Sam Harris]

I say that yet I



https://www.tahoeyukonforum.com/threads/2003-sierra-bumper-grille-swap.16635/

Someone here has done it before,it does look more involved though than I lead you to believe my apologies, still it is possible if you are willing to go the extra mile to make it work.
From what im gathering you would need to cut the frame horns(like how cat eye swaps for tahoes are) and weld the ones from the sierra for the new fitment,then it is bolt on.I guess this is the cat eye swap of the Yukon world :/

Ah. Dammit. Yeah, I’m not doing all that right now.. also, now that I’ve seen it, not sure I want the Sierra bumper either. Probably just stick with what I’ve got for now. I need to get my cam, and heads figured out... [emoji16][emoji106]

 

[Mezzo]

Ah. Dammit. Yeah, I’m not doing all that right now.. also, now that I’ve seen it, not sure I want the Sierra bumper either. Probably just stick with what I’ve got for now. I need to get my cam, and heads figured out... [emoji16][emoji106]

To each their own, it is more involved than id be willing to do as well,I'm still trying to find seats for my Burban.

 

[Sam Harris]

Got started cleaning up these calipers for painting last night. Going to be a minute. I have little free time. But I need to get my butt in gear, because today my Powerstop Z36 kit arrived! [emoji16][emoji631]

 

[Rocket Man]

Got started cleaning up these calipers for painting last night. Going to be a minute. I have little free time. But I need to get my butt in gear, because today my Powerstop Z36 kit arrived! [emoji16][emoji631]

Are those the ones I sold you, Sam?

 

[Sam Harris]

Are those the ones I sold you, Sam?

Yessir! I believe my Yuk will have some of the Machine’s parts soon. [emoji16][emoji106]

 

[Mezzo]

Today I tackled the last part of the Suburbans carpet extracting,finished the drivers side after much delay.Didnt take a before pic,but it was clumpy.

 

[ivin74]

View attachment 257025 Working on it, got the steering wheel controls working and backup cam going, now for the amps...

View attachment 257025

@Doubeleive
What size is that screen?

 

[Bear77]

Got a little bit of time on my hands so decided to put in some sound deadener in the truck. It’s a work in progress, I don’t really have any space to store anything.

Couple pics, because it is happening and I know how we all love pics!

Finished the rear...

Moved up to second row...

I have a few spots that I need to place some trimmed pieces but wanted to get as far as I could using full sheets. But that’s where I stopped for the time being. Still need to remove the front seats and center console so can finish up. Still undecided on whether or not to do the roof or how far up the side I’m going to go. Im a little hesitant about removing the headliner. The headliner does need to get redone but I’m hesitant about doing that as well!


Sent from my iPhone using Tapatalk