Some aftermarket audio unit that you access on your main stereo by tuning to which of these frequencies you select. Could be for a CD player or something else.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Govment watching you pal
Aliens waiting until you've grown enough to harvest.
inmypassatlife
Full Access Member
- Joined
- Feb 21, 2017
- Posts
- 979
- Reaction score
- 672
We all are
Donwp said: ↑
under the dashboard of my car don't know what it is.
if anyone knows what it is please tell me View attachment 203218 View attachment 203219
Its called an FM modulator. You tune your radio to that frequency and whatever audio device is plugged into it will broadcast through the station.
under the dashboard of my car don't know what it is.
if anyone knows what it is please tell me View attachment 203218 View attachment 203219
Its called an FM modulator. You tune your radio to that frequency and whatever audio device is plugged into it will broadcast through the station.
inmypassatlife
Full Access Member
- Joined
- Feb 21, 2017
- Posts
- 979
- Reaction score
- 672
Anyone in the market for a low mileage 05 Yukon XL?
https://sanantonio.craigslist.org/cto/d/2005-yukon-xl-1-owner-garaged/6641439160.html
On another note, after the door lock issue came back I removed the TCB fuse and then pressed down on the brake pedal to kill any remnant of 12v in the truck...since then the issue has not returned. I got the new ground, 12v, and brake switch in today. I am going to go ahead and replace them this weekend, but I won't be making it to Dub Show on Saturday
https://sanantonio.craigslist.org/cto/d/2005-yukon-xl-1-owner-garaged/6641439160.html
On another note, after the door lock issue came back I removed the TCB fuse and then pressed down on the brake pedal to kill any remnant of 12v in the truck...since then the issue has not returned. I got the new ground, 12v, and brake switch in today. I am going to go ahead and replace them this weekend, but I won't be making it to Dub Show on Saturday
MannyB
Full Access Member
Tonyrodz
Resident Resident
What's TCB stand for?
BowtieBeezy
Member
I've been rackless for a few months, but decided to reinstall it the other day. Idk if I ran the bolts in too far or what, but now they won't come back out. Just spin... ever happened to anyone else? If so what is the fix?
Maybe pull the headliner down and see if you can get vise-grips on it from underneath to keep it from spinning. Hopefully the rivnut doesn't leak now.
BowtieBeezy
Member
Thanks... I was hoping I wouldn't have to pull the headliner, but I will if necessary
It might be possible to first spray with WD-40 or PB Blaster (you should do this regardless if you haven't already) and try to pull up on the rail any way you can in order to get pressure on the rivnut to keep it from spinning. Maybe get a thin prybar under with something to protect the paint if possible (tape?); pry up and turn the screw at the same time. You have to be careful obviously to not scratch the paint or dent the roof.
Bombsquad85
Full Access Member
Ac fan just shit the bed on me so I ordered a new blower resistor and harness hopefully that fixes the problem
I agree with what you’re saying about pressure on rivnit but maybe he should push down on rack so the rack contacts the ‘head’ of the rivnut to keep it from spinning....
BowtieBeezy
Member
The rack is currently off. I put the screws back in after I removed it a few months ago. Now I'm trying to take the screws back out so I can install an esky rack
Oh, you’re ******.....
Kidding, guess what your doing soon.... pulling headliner.... or a pair of needlenose pliers on side of head of rivnut with scratching paint but you may not get a good enuff bite
inmypassatlife
Full Access Member
- Joined
- Feb 21, 2017
- Posts
- 979
- Reaction score
- 672
Part of the BCM main power supply is my understanding, but finny thing it's been what 2 maybe 4 days and no issues... Wonder if the new parts riding shotgun in the truck have anything to do with that lol
Tonyrodz
Resident Resident
I took out my 3rd row, swapped out my JL amp, because it was giving me issues, to a Rockford and added another 12 Pioneer sub box. I tried the MTX sub box, but I dixn't like how it sounded, and tore the foam surround. All in a day's work.
Tonyrodz
Resident Resident
3rd row delete.
I'm gonna just run the 2 like this for now. Ported box is facing down and the enclosed box is facing the front. I'm gonna see how it sounds and go from there.
I'm gonna just run the 2 like this for now. Ported box is facing down and the enclosed box is facing the front. I'm gonna see how it sounds and go from there.
Bombsquad85
Full Access Member
Are you gonna keep the mtx?
Similar threads
