What did you do to your NBS GMT800 Tahoe/Yukon Today?

[#1taho]

So my ball joints feel ok and no clunking. Might try just replacing the boots for now since i dont want to have to deal with getting another alignment.

I just replaced my ball joints. They had no movement but when I took them out they were definitely screwed. I am not sure how they didn’t fall out. Funny thin is I have had a bump steer problem for two years and couldn’t solve it. I checked the front end 20 times and had other shops and people check at least 10-15 times. For what they are worth I would do them.

 

[#1taho]

Highly unlikely you have more than one regulator going out at the same time. Especially since you said ALL the power windows. You must have a power problem. As in maybe a ground problem?

Check the wires under the drivers seat. The orange one burns up. I thought the same as you and replaced the switch. And I was wrong. Look under your out seat and check the big plug.

 

[ScottyBoy]

Oh boy! Did they have any HD hoods?

I wish!! The truck I got this grill and bumper cap off of had the hood already gone. This was the only HD in the yard.

 

[05Single]

I didn't exactly do anything to my truck this weekend, but I did get something for it. I drove almost two hours yesterday to go to a "You-Pull-it" junkyard that I have never been to before. I went because they had plenty of 00-06 NBS trucks and SUVs listed in their inventory, and BOY DID I RACK UP!!!!View attachment 188115

Nice score !

I killed my HD grille

I'm not sure what happened

 

[kwOH]

Nice score !

I killed my HD grille View attachment 188121

I'm not sure what happened

CALM DOWN! Lol, looks like what would happen to something that I had if it didn’t fit right.

 

[Bombsquad85]

What year is your Tahoe?
Seat motors should be the same. I know you need to reflow the solder connections for the PRNDL. Hopefully someone will chime in and be more specific.

Thanks Tony. My tahoe is an 01 and the Denali is an 05.

Appreciate the info on the PRNDL

Hopefully the seat is straight forward.

Also will the cold air intake I have on the tahoe 5.3L fit on the Denali 6.0L?

 

[mals]

is it an easy fix if everything in the gauge cluster works minus the gear shift indicator?

I know you need to reflow the solder connections for the PRNDL. Hopefully someone will chime in and be more specific.

I had the same problem on my 2005 Denali. There are a bunch of videos on youtube if you search, but this one covers most of the points and is the one I normally link to: Fix for GM gauge cluster PNRD123 Light

It was not that difficult to do. Shouldn't be a propblem if you're motivated to do it, and have held a soldering iron before.

 

[Rocket Man]

Nice score !

I killed my HD grille View attachment 188121

I'm not sure what happened

Tornado? Damn that thing's fu#ked up.

 

[Bombsquad85]

I had the same problem on my 2005 Denali. There are a bunch of videos on youtube if you search, but this one covers most of the points and is the one I normally link to: Fix for GM gauge cluster PNRD123 Light

It was not that difficult to do. Shouldn't be a propblem if you're motivated to do it, and have held a soldering iron before.

Thanks man. And my hand is pretty steady I was a bomb tech haha

 

[Fosscore]

Nice score !

I killed my HD grille View attachment 188121

I'm not sure what happened

I recognize that scene and level of frustration too... smh yessir!!

 

[ScottyBoy]

Thanks Tony. My tahoe is an 01 and the Denali is an 05.

Appreciate the info on the PRNDL

Hopefully the seat is straight forward.

Also will the cold air intake I have on the tahoe 5.3L fit on the Denali 6.0L?

Yes, a cold air intake from a 01 Tahoe will fit a 06 Denali, but not vice versa. The 06 has electric fans, and the intake tube is slightly larger. The 01 intake tube is made to fit over the fan shroud of the clutch fan, the 06 tube is not.

 

[ScottyBoy]

Nice score !

I killed my HD grille View attachment 188121

I'm not sure what happened

Dafuq did you do son??

 

[Bombsquad85]

Yes, a cold air intake from a 01 Tahoe will fit a 06 Denali, but not vice versa. The 06 has electric fans, and the intake tube is slightly larger. The 01 intake tube is made to fit over the fan shroud of the clutch fan, the 06 tube is not.

Will the stock airbox from the Denali fit on the tahoe? 01 tahoe 05 yukon... I don't have the stock airbox for the tahoe

 

[05Single]

Dafuq did you do son??

I rear ended a prius

Lol ok
I was grabbing some box's from the top shelf in the garage. I just took the grille off a couple days ago to prep it for paint. Was very excited for that.
As I grabbed a box another came with it and landed on the ds wing and broke it completely off. I said 'no box only I can destroy my truck parts'....so i was like

 

[TwiztidPixel]

Is that HD grill a direct fit part? Is that bumper cover needed? Dunno why but I never even noticed it was different until now!

 

[Tonyrodz]

Is that HD grill a direct fit part? Is that bumper cover needed? Dunno why but I never even noticed it was different until now!

The grill needs some trimming on the lower edge, and some of the mounting pegs behind it and it'll fit right in.

 

[Rocket Man]

I rear ended a prius

Lol ok
I was grabbing some box's from the top shelf in the garage. I just took the grille off a couple days ago to prep it for paint. Was very excited for that.
As I grabbed a box another came with it and landed on the ds wing and broke it completely off. I said 'no box only I can destroy my truck parts'....so i was like View attachment 188129

Cool! My kind of guy.

 

[kwOH]

I rear ended a prius

Lol ok
I was grabbing some box's from the top shelf in the garage. I just took the grille off a couple days ago to prep it for paint. Was very excited for that.
As I grabbed a box another came with it and landed on the ds wing and broke it completely off. I said 'no box only I can destroy my truck parts'....so i was like View attachment 188129

Lmao

 

[ScottyBoy]

The grill needs some trimming on the lower edge, and some of the mounting pegs behind it and it'll fit right in.View attachment 188135

Grill only needs trimming if you are using it with the stock Tahoe/Suburban bumper cap. If you install the 2500HD bumper cap, then you don't have to trim a damn thing on the grill.

 

[Tonyrodz]

Grill only needs trimming if you are using it with the stock Tahoe/Suburban bumper cap. If you install the 2500HD bumper cap, then you don't have to trim a damn thing on the grill.

Oops, forgot to add that. Doesn't some relocation of the bumper brackets need to be done if you want to use the HD bumper with the grill?