Tahoe pics with cooper zeon's

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

pavich91

Member
Joined
Oct 21, 2012
Posts
39
Reaction score
10
Location
Vancouver BC Canada
Hi guys,

Decided to get the Cooper Zeon's but not sure if i should go with stock size (275/55/20) or something else. Pics would be great if anyone has this set up.
 

Gael

Member
Joined
May 21, 2012
Posts
36
Reaction score
2
Location
Laredo, Tx
dont get 275/55r20. i was running those and they look crappy. i'd go with the 33x12.50x20
 
OP
OP
pavich91

pavich91

Member
Joined
Oct 21, 2012
Posts
39
Reaction score
10
Location
Vancouver BC Canada
Ya,i have stock size on there right now, your right, looks crappy.lol

Def going with the 305/50/20, just worried about rubbing
 

2000Yukon

Full Access Member
Joined
Jul 17, 2009
Posts
513
Reaction score
7
Location
Nebraska
The only time you might rub a bit is at full lock and flexing the suspension a bit.

Had Zenon's in that size and only had minimal rubbing.
 
OP
OP
pavich91

pavich91

Member
Joined
Oct 21, 2012
Posts
39
Reaction score
10
Location
Vancouver BC Canada
So if i drove on some rough terrain, would it be rubbing like crazy?
Not that i take this through the bush or anything but i drive to some wild construction sites once in awhile.
 

hoe

Full Access Member
Joined
Nov 24, 2009
Posts
696
Reaction score
17
I bought the cooper zeons today for $1000 shipped
Hope they work out good

didnt see this thread earlier... but I run the 305/50/20s, with wheel spacers... cause Im a bad ass... and yet still I have 0 rubbing unless I try to do something crazy, besides all of that, Im lowered 2/4 on top of that...
 
OP
OP
pavich91

pavich91

Member
Joined
Oct 21, 2012
Posts
39
Reaction score
10
Location
Vancouver BC Canada
didnt see this thread earlier... but I run the 305/50/20s, with wheel spacers... cause Im a bad ass... and yet still I have 0 rubbing unless I try to do something crazy, besides all of that, Im lowered 2/4 on top of that...

Lol, good to hear. Then i shouldn't have a problem, or even need spacers if your lowered and don't have issue.
What size spacers are you runnin? Tires stick out past the fender?
 

jmyler

Full Access Member
Joined
Oct 28, 2009
Posts
482
Reaction score
1
Location
atlanta
Don't know if it helps but i have 305/45/22 cooper zeon's which should amount to about the same height, with zero rubbing. From the picture it looks like the back might stick out but if you look over the top of the tire it's almost exactly in line with the back fender.
image_3.jpg
 

imi4tth3w

Full Access Member
Joined
Jan 14, 2010
Posts
386
Reaction score
60
Location
Texas
i had them in a 305 55 20 (33 12.50 20) for a while before i went bigger on my truck and sold them. didn't really have them long enough to really test them out. basically a slightly cheaper nitto terra grappler. keep them rotated every 5k and at proper air pressure (35-40psi depending on what load range they are). not going to last as long as nittos would but still a good tire.
 

01Konvict

Boats n Hoes
Joined
Jan 16, 2011
Posts
2,747
Reaction score
707
Location
Raleigh/SML
The tires look great, you can always crank your keys up a little bit if its not level right now.
 

Forum statistics

Threads
137,766
Posts
1,991,617
Members
102,756
Latest member
dizhai

Latest posts

Back
Top