[SOLVED] Rear glass defroster tab

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Status
Not open for further replies.
OP
OP
T

the blur

Full Access Member
Joined
Oct 21, 2012
Posts
496
Reaction score
151
Location
Cyber Space
Any Tahoe, Suburban, Escalade, Escalade ESV, Yukon, Yukon XL. definitely 2011. 2012 .. 2013. Probably 2014 as well.
and once again, it's a *glass to tab* adhesion problem. Nothing else. Nothing else was asked about. Very simple.

The stupidity in this world is beyond comprehension. Besides people above trying to create problems. I just asked another glass shop, and he said.. well. "Half the defroster still should work". ok, that's why you work in a glass shop, and not in a mechanical shop.
 

Fless

Staff member
Moderator
Joined
Apr 2, 2017
Posts
16,403
Reaction score
33,933
Location
People's Republic of Colorado
Any Tahoe, Suburban, Escalade, Escalade ESV, Yukon, Yukon XL. definitely 2011. 2012 .. 2013. Probably 2014 as well.
and once again, it's a *glass to tab* adhesion problem. Nothing else. Nothing else was asked about. Very simple.

I was asking specifically about your vehicle, the one with the non-working defroster, not a run of them in general.
 

adventurenali92

Full Access Member
Joined
Feb 16, 2015
Posts
7,722
Reaction score
9,173
Location
Big Bear Lake, ca
Any Tahoe, Suburban, Escalade, Escalade ESV, Yukon, Yukon XL. definitely 2011. 2012 .. 2013. Probably 2014 as well.
and once again, it's a *glass to tab* adhesion problem. Nothing else. Nothing else was asked about. Very simple.

The stupidity in this world is beyond comprehension. Besides people above trying to create problems. I just asked another glass shop, and he said.. well. "Half the defroster still should work". ok, that's why you work in a glass shop, and not in a mechanical shop.
It’s not specific to the GMT900s. Every generation of GM SUV I detail has at least one broken tab on one side. My 2006’s glass lost two tabs. The 2005 Escalade glass I swapped on for the tail light mod had a broken tab. I have three clients with K2 platform rigs and they all have broken tabs. Just a crappy design in general from GM. The new T1 trucks still have the same exact tab mount setup, it’s just hidden under a plastic cover. Which helps from what I’ve seen but their plastic covers are easy to break. I just did a T1 platform rigs last week and the cover was broken and missing, exposing the tab. Frost fighters repair kit for the win. The tabs on my Escalade rear glass are still good several years after the repair.
 
OP
OP
T

the blur

Full Access Member
Joined
Oct 21, 2012
Posts
496
Reaction score
151
Location
Cyber Space
It’s not specific to the GMT900s. Every generation of GM SUV I detail has at least one broken tab on one side. My 2006’s glass lost two tabs. The 2005 Escalade glass I swapped on for the tail light mod had a broken tab. I have three clients with K2 platform rigs and they all have broken tabs. Just a crappy design in general from GM. The new T1 trucks still have the same exact tab mount setup, it’s just hidden under a plastic cover. Which helps from what I’ve seen but their plastic covers are easy to break. I just did a T1 platform rigs last week and the cover was broken and missing, exposing the tab. Frost fighters repair kit for the win. The tabs on my Escalade rear glass are still good several years after the repair.

WoW, The responses are getting more intelligent. We're now running 50/50 with intelligence and stupidity. At least things are improving. The glass company finally admitted they have a supplier problem, and it's all too common that these tabs fall off. This is after lying to me, trying to run away from the problem.
 

adventurenali92

Full Access Member
Joined
Feb 16, 2015
Posts
7,722
Reaction score
9,173
Location
Big Bear Lake, ca
WoW, The responses are getting more intelligent. We're now running 50/50 with intelligence and stupidity. At least things are improving. The glass company finally admitted they have a supplier problem, and it's all too common that these tabs fall off. This is after lying to me, trying to run away from the problem.
Not sure if you saw my first posted response. I gave a short synopsis of what I did to fix my tabs with the frost fighters tab repair kit. Good luck in getting it fixed either with the glass shop or fixing the tabs.
 

Sir_Hiro

Automotive Mad Scientist
Joined
Jan 28, 2025
Posts
288
Reaction score
710
The stupidity in this world is beyond comprehension. Besides people above trying to create problems.
I mean you're currently in the lead for stupidity. No-one above was suggesting to create more problems. You never said if the defrost worked before or not. It wont create a problem checking for Power at the tab. But I mean you keep trying to insult people who were honestly trying to help and you'll get nowhere.

Once again your attitude towards people is showing and its painting a picture that isn't good.
 
Last edited:
OP
OP
T

the blur

Full Access Member
Joined
Oct 21, 2012
Posts
496
Reaction score
151
Location
Cyber Space
I mean you're currently in the lead for stupidity. No-one above was suggesting to create more problems. You never said if the defrost worked before or not. It wont create a problem checking for Power at the tab. But I mean you keep trying to insult people who were honestly trying to help and you'll get nowhere.

Once again your attitude towards people is showing and its painting a picture that isn't good.

I asked about a tab, not a voltage check. There is absolutely NO reason to check for voltage, until the tab is corrected, and then you can obviously see if it is working. You just like to charge your customers for nothing, or do NOT know proper troubleshooting steps.
 

Sir_Hiro

Automotive Mad Scientist
Joined
Jan 28, 2025
Posts
288
Reaction score
710
I asked about a tab, not a voltage check. There is absolutely NO reason to check for voltage, until the tab is corrected, and then you can obviously see if it is working. You just like to charge your customers for nothing, or do NOT know proper troubleshooting steps.
You are incredibly dense my guy. Its literally talking to a wall.
Troubleshooting involves making sure the entire system works not just a single portion of it.
You know absolutely nothing about Troubleshooting or anything else involved in fixing problems..otherwise you wouldnt be on this fourm asking us for help.

Diagnostic fees include the full system not just the portion. The old saying of the customer is always right has never worked in the automotive industry where 98% of people know absolutely nothing about cars.
 
OP
OP
T

the blur

Full Access Member
Joined
Oct 21, 2012
Posts
496
Reaction score
151
Location
Cyber Space
You are incredibly dense my guy. Its literally talking to a wall.
Troubleshooting involves making sure the entire system works not just a single portion of it.
You know absolutely nothing about Troubleshooting or anything else involved in fixing problems..otherwise you wouldnt be on this fourm asking us for help.

Diagnostic fees include the full system not just the portion. The old saying of the customer is always right has never worked in the automotive industry where 98% of people know absolutely nothing about cars.
You are the dense one. There is no reason to troubleshoot beyond my eyes seeing a tab hanging off. Trouble shooting is complete. open circuit !! ding ding !! open circuit. You are the reason most car guys do their own work.
 

Sir_Hiro

Automotive Mad Scientist
Joined
Jan 28, 2025
Posts
288
Reaction score
710
You are the dense one. There is no reason to troubleshoot beyond my eyes seeing a tab hanging off. Trouble shooting is complete. open circuit !! ding ding !! open circuit. You are the reason most car guys do their own work.
Good. More money for us when you screw it up.
Guys like you are the reason I left the automotive world in that aspect and Im much happier for it. Having to explain to a brain dead customer why we did what we did.
 

RST Dana

Elite Member
EMT/First Responder Firefighter Supporting Member
Joined
Jan 15, 2018
Posts
1,982
Reaction score
1,863
Location
OH
Maybe the OP will ask Santa for the game clue, because he doesn’t have one!
He didn’t post pictures or state the TAB was not attached in the initial post, and now when he is getting flamed, he is butt hurt and needs to buy sone cheese to go with all his WINE!
 

Joseph Garcia

Elite Member
Supporting Member
Joined
Aug 2, 2018
Posts
10,351
Reaction score
15,007
You are the dense one. There is no reason to troubleshoot beyond my eyes seeing a tab hanging off. Trouble shooting is complete. open circuit !! ding ding !! open circuit. You are the reason most car guys do their own work.
I see that you still have your panties twisted into a knot. Looks like they are squeezing even tighter. Are you going to stamp you feet now, and put on a big pout for us? Maybe hold your breath until your face turns red?
 
Status
Not open for further replies.

Forum statistics

Threads
137,817
Posts
1,992,840
Members
102,795
Latest member
Drewphil
Back
Top