Show off your 2015+ leveled Tahoes and Yukons!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

maxpsi

Member
Joined
Oct 10, 2021
Posts
52
Reaction score
20
Just finished this weekend.

3.5" front spacer with cognito upper control arms/kryptonite tie rods/Movotech lower TTX with Blistien 4600 shocks/struts F + R and +3" rear spacer/extended sway bar links (sits actually pretty level) and angle are good (no CVS)

Rims are 20x10 ultra hunter with 4.5 backspacing and 33x12.50r20 tires.

Slight rub on full lock/driveway (bump) but normal driving no rubbing. Drives really nice and solid feeling.

What’s the part number for the tie rods?
 

Fifty

Full Access Member
Joined
Jun 26, 2015
Posts
790
Reaction score
193
Before and after. Installing rear springs today. So I’ll post the final pics later.
Hoping for around 2 inches lift all around.

Ads 2.5 coilovers front and 2.5 remote reservoir rears. Lift springs and z71 bumps out back.
RC uca.
 

Attachments

  • D931990E-3E4F-4CC5-8DA1-5C6440650A63.jpeg
    D931990E-3E4F-4CC5-8DA1-5C6440650A63.jpeg
    439.4 KB · Views: 45
  • 0DD3E5BB-0AED-4B31-B2BA-7FB4DE1EADB2.jpeg
    0DD3E5BB-0AED-4B31-B2BA-7FB4DE1EADB2.jpeg
    422.9 KB · Views: 45

Fifty

Full Access Member
Joined
Jun 26, 2015
Posts
790
Reaction score
193
Anybody know the motion ratio? I need to lower the vehicle about 1.5 inches and I have 15 threads showing (1.5” of threads).

I really only want to take the coilovers off once.
 

Forum statistics

Threads
128,786
Posts
1,805,365
Members
91,765
Latest member
AT4Hunter

Latest posts

Top