liftedtahoe
Full Access Member
Your just wanting the front lifted? Nothing done to the rear?
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk
Post your lifts.
- Thread starter timinsk
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
massivespl
I'm not mean, I'm honest.
Yea the rear looks lower then the front already. Get a 6" lift all the way around not just the front. That would looks silly
Antonio Estrada
TYF Newbie
I want 6 inches up front i don't mind it normal in the back because i want it to squat maybe 3in in the back at most
liftedtahoe
Full Access Member
I'm with massivespl on this one for sure! I think it needs 6" all the way around
Sent from my SAMSUNG-SM-N910A using Tapatalk
Antonio Estrada
TYF Newbie
What about 6 front n 4 in back ?
liftedtahoe
Full Access Member
That's my opinion though, but you can probably call up rough country or any lift supplier for that matter an order just a front lift
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk
liftedtahoe
Full Access Member
I would do a 6" all the way around and put your lift key on top tall put your front up 1.5-2 5" higher than the back depending on how much you crank it
Sent from my SAMSUNG-SM-N910A using Tapatalk
Antonio Estrada
TYF Newbie
3in spindles 3in keys ? Will give total of 6 up front and if i switch my air ride system to shocks n bigger springs ill be able to get 3 or 4 in the rear?
liftedtahoe
Full Access Member
Most the lift knuckles I have seen need diff drop brackets too because you upper control arm stays in its factory location, an just drops the lower control arm/ diff, if you got lift knuckles you front end would be in a bind, an you would go through bearings balljoints and axles
Sent from my SAMSUNG-SM-N910A using Tapatalk
Antonio Estrada
TYF Newbie
So its better just to get my lift all around and use my keys on top to get it higher in the front it be the safest thing and reasonable thing to do?
liftedtahoe
Full Access Member
Yes sir! That would be your best bet in my honest opinion!
Sent from my SAMSUNG-SM-N910A using Tapatalk
Antonio Estrada
TYF Newbie
Could i get a 4in lift off rough country? Bc any where more than 6.5 in wont let me pull in to my
Antonio Estrada
TYF Newbie
To my carport
liftedtahoe
Full Access Member
Don't know if they make a 4" for it
Sent from my SAMSUNG-SM-N910A using Tapatalk
liftedtahoe
Full Access Member
You could always do a 3" body lift and clear 35s that's what I have on mine
Sent from my SAMSUNG-SM-N910A using Tapatalk
Antonio Estrada
TYF Newbie
Have a side picture ?
liftedtahoe
Full Access Member
Only thing is I have 2" spacers on the rear of my black hoe and 1.5" spacers on my pewter one
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk
Antonio Estrada
TYF Newbie
Alright i think ima do the 3in all around you have the link from witch you bout yours from?
liftedtahoe
Full Access Member
I bought my kit off ebay, it's a zone performance body lift I can get you a item number if need be though
Sent from my SAMSUNG-SM-N910A using Tapatalk
Antonio Estrada
TYF Newbie
Yes i would appreciate it if you could
