Need a little help wiring my subs

[LEBROND]

I was wondering if someone can draw me a diagrahm on how to wire my subs so that I can get the most bass and sound out of them.....I have 3 kicker comp cvr122 w/ 2ohms @ 400 watts rms and peak power is 800 watts in a ported box

This is how it is now:

 

[Sir-Lancelot]

Depends on your amp Bro.

 

[SunlitComet]

Amp make and model please for specification look up.


If the amp cannot handle a load lower then but greater then 2 ohms then use the 3-ohm load picture that Lancelot posted.

Amp details will tell more.

 

[LEBROND]

Kicker zx1500.1.....s/n where can I order a big three upgrade kit

 

[blueflamed03]

you'll have to go with the 3 ohm hookup, you needed dual 4's

 

[SunlitComet]

this would be compatible in load to the amp but with that amp you may blow them if you push it to far. it did claim 1500w rms at 2 ohms.

 

[blueflamed03]

It will do well over 1400+ if given proper current. The three CVR's will handle it, but the three ohm is the only option, unless he got different woofers.

 

[Sir-Lancelot]

I would try it at 1.3 and hope box rise keeps the amp out of protect. If it starts shutting down, you would have to wire up to the 3ohm load obviously. Your amp is only stable to 2ohm so it may go into protect on you or worse if you dont know what your doing.

It's your amp so do what you feel safe doing, but that's what I would do.