How to install amp/sub into 2000 OBS denali with Bose??

[billbies]

New to this truck and have installed many systems just never into anything with Bose

I have an amp and 12" sub I want to install
I know the bose amp is under the console
Just curious where I get my pick up for my RCA's and remote wire?

Any help is appreciated and also can I install an Aftermarket HU like normal or would I have to rewire all speakers?


Thanks

 

[_Dylan_]

line out converter, walmart has them

 

[billbies]

thank you for the reply
is it best to run off the outputs at the amp or of the harness behind the HU
Direct me to a wire chart for the correct wires to hook up line out converter to?
Which wire is best to use for remote wire?

Thanks for the help

 

[SunlitComet]

line out converter, walmart has them

X2

 

[billbies]

Thanks for the reply I have one in my hands

Where is the best to get the signal behind the HU or get it at the bose amp in the center console???

Thanks

 

[jdpber]

you can do either.. its the same signal
i have wired cars both ways..

---------- Post added at 09:30 AM ---------- Previous post was at 09:29 AM ----------

at the bose amp may prove to be the easiest as you will have less wires to work with.. its all up to you .. personally i prefer behind dash so the box is hidden in the dash

 

[billbies]

if behind dash what wire for the remote lead do you tap into

Thanks for the info

 

[jdpber]

your going ot need a multi meter.. or a signal light.. and find a hot wire when ignition and radio are on.. that is cold when ignition is off..

 

[billbies]

ok thanks didnt know if you knew right off the top of your head

 

[SunlitComet]

actually use the the accessory wire. that circuit switches radio on and off.

 

[drjay2012]

check pac audio, its plug in play, no cutting of wires

http://www.pac-audio.com/productDetails.aspx?ProductId=169&CategoryID=26