Help me decide my rim and tire size!

Discussion in 'Lifted Supension - Z71 & 4x4' started by BoostAddict, Sep 10, 2018.

Page 1 of 2
  1. Sep 10, 2018 at 12:26 PM #1
    BoostAddict

    BoostAddict TYF Newbie

    Posts:
    2
    Likes Received:
    0
    Joined:
    Sep 10, 2018
    Name:
    Justin
    Hey Guys,

    First off, I have an 07 z71 4x4 with a 2" rough control front level .

    I'm looking into getting Fuel Triton wheels. Thinking about doing an 18" wheel, and hope to run a 33x12.5 tire. Will this work?

    They are available in the following configurations:

    18x9 in -12mm, +1mm, or +20mm offset

    20x9 in +1mm, or +20mm offset

    20×10 in -18mm offset

    What do you guys think?
     
  2. Sep 10, 2018 at 2:23 PM #2
    Big Mama

    Big Mama Full Access Member

    Posts:
    900
    Likes Received:
    282
    Joined:
    Jul 21, 2015
    Location:
    Virginia
    Name:
    Steven
    Go on line to the tire size calculator to see what fits. I’d think 33 are fine. Wheel size depends on taste and what type of ride you like post pics when done.
     
  3. Sep 10, 2018 at 4:06 PM #3
    swathdiver

    swathdiver Full Access Member

    Posts:
    6,912
    Likes Received:
    5,381
    Joined:
    May 18, 2017
    Location:
    Treasure Coast, Florida
    Name:
    James
    How much of an off-road capability do you want to retain? The smaller diameter wheel will maintain the designed off-road capability and ride.
     
  4. Oct 14, 2018 at 12:23 PM #4
    jroyer87

    jroyer87 Member

    Age:
    31
    Posts:
    68
    Likes Received:
    71
    Joined:
    Sep 30, 2015
    Name:
    jroyer87
    Your gonna have to trim the inner plastic on the bumper to keep from rubbing. I’m running like a 32 on stock z71 wheels and rub the inner plastic pretty bad.


    Sent from my iPhone using Tapatalk Pro
     
  5. Oct 15, 2018 at 10:23 PM #5
    Fir_Na_Tine

    Fir_Na_Tine Member

    Posts:
    62
    Likes Received:
    15
    Joined:
    Feb 20, 2015
    Name:
    Larry
    33's will work ok. I have 285/70R17's which is basically a 33 and have no rubbing issues on my Hoe. I'm on stock wheels though. I think your main concern is what I am trying to figure out and that is wheel offset. The more negative offset the more the tires will be pushed out and also cause the tire to hit in areas when turning the wheel. So some cutting/trimming is going to be needed.
     
  6. Oct 18, 2018 at 1:46 PM #6
    Drok

    Drok Supporting Member

    Posts:
    990
    Likes Received:
    717
    Joined:
    Jul 16, 2012
    Location:
    Cold place in the north
    Name:
    Derek
    I have 275/60/20 duratracs and theyre just above 33 cause of the tread. They fit great and only had to pull back a couple places in the well to keep from full turn rubbing. I think mine are a +30 offset, the sidewall tread is the only part thats past the fender.
     
  7. Oct 18, 2018 at 1:49 PM #7
    Drok

    Drok Supporting Member

    Posts:
    990
    Likes Received:
    717
    Joined:
    Jul 16, 2012
    Location:
    Cold place in the north
    Name:
    Derek
    Forgot to say i also have a 2.5/1.5 level

    36621E8A-D2A3-47AB-8DE5-893D42ACFB10.jpeg
     
  8. Nov 9, 2018 at 8:40 AM #8
    Ben Hinz

    Ben Hinz Full Access Member

    Posts:
    111
    Likes Received:
    58
    Joined:
    Jan 13, 2016
    Location:
    Winter Garden, FL
    Name:
    Ben
    These are 305/55R20 loosely fitted to get an idea. I love it! Leveling kit needs to be installed.

    [​IMG]


    Sent from my iPhone using Tapatalk
     
    Drok and swathdiver like this.
  9. Nov 9, 2018 at 8:41 AM #9
    Ben Hinz

    Ben Hinz Full Access Member

    Posts:
    111
    Likes Received:
    58
    Joined:
    Jan 13, 2016
    Location:
    Winter Garden, FL
    Name:
    Ben
    Here’s a better idea of the poke.

    [​IMG]
     
  10. Nov 16, 2018 at 2:02 AM #10
    Lil_Stump

    Lil_Stump Full Access Member

    Posts:
    93
    Likes Received:
    50
    Joined:
    Apr 22, 2016
    Location:
    Brunswick, GA
    Name:
    Conner
    You planning to run x12's and 33's on a 2" level? I had that on a 3.5" RCX and had to cut like hell to get full crank, norcal and everything. Looks good but just beware that's an insane amount of cutting you'll be getting into.
     
Page 1 of 2

Share This Page