From lifted to lowered

[White07Tahoe]

I decided to change my Tahoe a little. I had a CCM 2.5/1" leveling kit with 305/55/20 terra grapplers. Now I put the stock 275/55/20 tires back on with 2" drop spindals, adjustable struts lowered about an inch, drop springs and shocks in the back with rear hardware kit, all Belltech. Also have helper bags so I can still tow some things. I removed roof rails. I had already removed the running boards and I can't decide if I should put them back on. Opinions?
Before:

Now:

016 by White07Tahoe, on Flickr

019 by White07Tahoe, on Flickr

012 by White07Tahoe, on Flickr


[url=http://www.flickr.com/photos/66654470@N06/6444200931/]022 by White07Tahoe, on Flickr

024 by White07Tahoe, on Flickr

015 by White07Tahoe, on Flickr

017 by White07Tahoe, on Flickr

027 by White07Tahoe, on Flickr
Can someone please make me a sig since I don't have one? Thanks!

 

[felixgun]

Looks great both ways. PLEASE put the running boards back on now that it's lowered!!

 

[Modded]

Looked good before Andrew, even better dropped!
I say put the running boards back on. Removing them makes the Tahoe look higher and shows some frame.

 

[White07Tahoe]

Thanks guy, I agree that it would make the truck look lower, I'll prob put them back on next week sometime.

 

[Jimmyp19]

Thanks guy, I agree that it would make the truck look lower, I'll prob put them back on next week sometime.

Roof rails.....I was thinking on doing the same thing, what did the wholes on the roof look like and how did you cover them?

Welding?

Did you just leave them open?

thanks

 

[OHSIXX]

Looks good as is so its a tough call to throw the boards back on....although they cover the frame from eyesight Either way--WeLL DoNe

 

[07Burb]

Nice job and I'd put the roof rails back on too

I'm also interested to know what you did about the holes in the roof

 

[sumo]

I love the lowered look, Agree with the running boards.

 

[lx4life]

Also put the front lip back on the bumper will look alot lower in the front.

 

[White07Tahoe]

Thanks for the comments
I'm going to put to boards back on to see how I like it and I'll post pics.
Roof rails are staying off for a while, I think it looks sleek with out them. I went to a local hardware store and got new 1/2" screws with a dab of silicone to fill the holes. Next I have to take off the satellite radio fin antenna.
I would like to have a stock front valance but the one on the truck is actually cut and I don't know where to get a new one and I don't feel like buying one.