Few Questions on lowering kits for my 07 NNBS Tahoe..

[RickyFriery97]

alright so my Chevy Tahoe is a 2007 NNBS and just rolled over 60K miles on the stock 20s and stock suspension, no autoride
i will evetually be rollin 6s or atleast 24"s
i would like to do the 3/5 kit, how hard is it gunna be to go that low with 26"s? i know a few members here are ridin like that.

how bad does it stiffen up the ride? i know ill have to sacrifice some ride but i dont wanna have a straight kidney killer ride

Baiscally want some kit suggestions, hope norcal will make his way in here
and tire size on 26"s and 24"s

suspension and wheels and tires is a whole new ball game to me, so if these are n00b questions i apoligize LOL
im mainly into car audio

 

[NORCAL SS]

my kit rides fine.
http://www.tbssowners.com/store/index.php?act=viewProd&productId=140

comes with new shocks all around and tb springs in rear ride great.


on 26s you will need 295 25 26 and on 24s 295 35 24

 

[RickyFriery97]

my kit rides fine.
http://www.tbssowners.com/store/index.php?act=viewProd&productId=140

comes with new shocks all around and tb springs in rear ride great.


on 26s you will need 295 25 26 and on 24s 295 35 24

excatly what im looking for! guess i know what to start saving up for
anything else i should replace up front since ive got 60k+ miles? or should i be fine?

any mods to the wheel wells needed?

 

[RickyFriery97]

What about on 24" esky reps? I just saw this truck and kinda fell in love lol

 

[RickyFriery97]

Nvm just saw the 24 tire size

Also I will have a rather large stereo, couple hundred pounds. How should I account for that?
It's 2 18"s in a 15cube net volume box 2 80lbs batts in the rear and 2 RF amplifiers

 

[Modded]

I have a 295/30/26 on my new setup and it works. Had 305/30/26 on my last setup and it worked. Keep in mind I have a 3/5 drop.

 

[RickyFriery97]

I have a 295/30/26 on my new setup and it works. Had 305/30/26 on my last setup and it worked. Keep in mind I have a 3/5 drop.

Did you have any rubbing? What about any mods to the wheel wells or anything like that?
I'm planning on going with Tony's 3/5 drop but I'm a Lil concerned about the weight of my system

 

[RickyFriery97]

im pretty much decided on the 24" Black esky reps, with Tonys 3/5 kit. tire size 295/35/24 as suggested by tony^
most likely will get the drop first, will i have any clearance issues once i get the wheels?

 

[NORCAL SS]

im pretty much decided on the 24" Black esky reps, with Tonys 3/5 kit. tire size 295/35/24 as suggested by tony^
most likely will get the drop first, will i have any clearance issues once i get the wheels?

With the 295 35 24 you should be good. i have the 2/3.5 on my escalade and rubs at full lock but nothing major and im on 305 35 24.

I will be going about another 1 inch lower in front/rear hopfully this weekend.

 

[ihaveamustang]

With the 295 35 24 you should be good. i have the 2/3.5 on my escalade and rubs at full lock but nothing major and im on 305 35 24.

I will be going about another 1 inch lower in front/rear hopfully this weekend.

What kind of wheel well trimming did you do? I'm in your 2/4 kit (which didn't go down that far due to autoride) and I'm rubbing a good bit.
Same wheels and tires too - same offset.

 

[NORCAL SS]

in front i rub only reverise and turning hard.

IN rear trimmed fenderwells and its fine.