Blacking out taillights?

[sopethree]

I would love to know how to tint my taillights the "right way". i notice alot of blacked out taillights look perfect and shiny. mine are flat looking and have weird paint variation. help!

 

[yates ™]

In my experience the ones done with with a rattle can like VHT turn faded, dull, and purple. A friend of mine who paints did mine by mixing some black paint into alot clear. They turned out shiny and have not faded at all.

 

[sopethree]

yep. exactly. i used that night shade shit and it just lookes a little wierd from up close. i do not have the ability to mix paints and stuff tho. mabey i will just go with covers.

 

[01HDtahoeNJN]

I have a thread on this but I used rustoleum lens tint its actually pretty glossy..... Theres someone on here who blacked there's out with it and didn't use clear came out really nice

Sent from my SCH-I500 using Tapatalk

 

[01HDtahoeNJN]

WAY better than VHT nite shade!!!
I will never use VHT again I used it once on my front turn signals and took it off almost instantly
everyone that uses it gets a dull finish even if they use clear coat and wet sand
but Rustoleum comes out so glossy and has the same tint effect as nite shade.. straight out of the can

I wetsanded the stock turn signal just to get it smooth then shot on the lens tint and this is how it came out

and back when I had my tail lights done with the lens tint

Sent from my SCH-I500 using Tapatalk

Sent from my SCH-I500 using Tapatalk

 

[blueflamed03]

I tried the VHT route, hate it...now need all new tail lights

 

[GalaxyBlackEsky]

I had mine done by a shop that does them Basically they just put black paint in the clear and then clear the hell out of it..

 

[yates ™]

Here is a picture of mine that were done the same way as BlackedoutLT3's except we did not clear over them just the clear that was part of the mix...

 

[felixgun]

Here is a picture of mine that were done the same way as BlackedoutLT3's except we did not clear over them just the clear that was part of the mix...

Yates did you ever get G4 LED tails smoked or are those just the stock yukon tails?

---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------

I had mine done by a shop that does them Basically they just put black paint in the clear and then clear the hell out of it..

who tinted your tails? Might tint my tails and sell them so I can buy those G5 LED Tails

 

[yates ™]

Yates did you ever get G4 LED tails smoked or are those just the stock yukon tails?

They are the stock ones. Light output is pretty good for how dark they turned out.

 

[carcrz]

I would love to know how to tint my taillights the "right way". i notice alot of blacked out taillights look perfect and shiny. mine are flat looking and have weird paint variation. help!

are you planning on doing this yourself if so let me know i can guide you thru it

 

[sumo]

I had a bodyshop guy do mine. It was Sprayed on, Wet sanded and Cleared

 

[foreverfalcon40]

LOOKS GOOD! Guy on here DEVS 93 does the same thing for $30 for tail lights...want the 3rd brake light $35 ****** MINT!

 

[yates ™]

LOOKS GOOD! Guy on here DEVS 93 does the same thing for $30 for tail lights...want the 3rd brake light $35 ****** MINT!

That is really cheap. My buddy charges $25 a light but luckly did mine for free

I had a bodyshop guy do mine. It was Sprayed on, Wet sanded and Cleared

We sanded mine with some sort of stuff in a tube and scotch brite then mixed some black in with a lot of clear then buffed. They turned out really shiny or at least as shiny as the rest of the vehicle paint.

 

[Devs93]

Ive gotta how to thread on gmt400 or just hit me up for killer prices

also can do healights corner lights and whatever else

 

[sopethree]

I tried

this is what i came out with when i tried, it lookes alot better now cuz i edited the picture.

 

[sopethree]

that looks ******* amazing! so dope

---------- Post added at 07:36 AM ---------- Previous post was at 07:36 AM ----------

I had mine done by a shop that does them Basically they just put black paint in the clear and then clear the hell out of it..

that looks ******* amazing....so dope

 

[sopethree]

I tried

lmfao

 

[sopethree]

cologne trick

I tried the VHT route, hate it...now need all new tail lights

try getting it off with ****** cheap cologne. trust me... it might sound weird but it works fir niteshade. also use some rubbing alchohol.

---------- Post added at 08:48 AM ---------- Previous post was at 08:07 AM ----------

are you planning on doing this yourself if so let me know i can guide you thru it

that would be great. im gunna try again at some point.

 

[Old Painless]

I was thinking about giving you the tail lights off my Yukon and buying myself some new ones... but after seeing some of these guys tail lights, I will probably get the stockers done up.

I'm not much help here Slappy... just figured I say hello and crap all over your thread.