E
Reaction score
42

Latest activity Postings About

    • E
      Eman85 replied to the thread Scan Tool??.
      I bought an Autel 629 on ebay for $80. It's a real basic scan tool which is good. I connected to my 97 Tahoe and it functioned fine...
    • E
      Eman85 replied to the thread Scan Tool??.
      Well I guess no one uses a scan tool. I ordered an Autel 629, we'll see how it goes. They are the only company I found tht has a US...
    • E
      Eman85 replied to the thread Blue leather seat covers?.
      Haven't done anything yet, too many other projects. I was hoping somebody would have bought some to see how they compared to the leather.
    • E
      Eman85 posted the thread Scan Tool?? in General Discussion.
      I need a scan tool and I want it to also do later model vehicles. I have good scan tools for pre-2006. What do you have that does later...
    • E
      Eman85 replied to the thread Driver pillar handle?.
      I have a short memory, I've had the passenger handle off on these trucks before but can't remember how they are attached to the pillar...
    • E
      Eman85 reacted to Swagfu's post in the thread Inexpensive upgrades/changes? with Like Like.
      I have done so much already and it runs good now. I changed the distributer cap, rotor, plugs, wires, cam sensor, crank sensor, coil...
    • E
      Eman85 replied to the thread Inexpensive upgrades/changes?.
      Best money spent is to be sure what you have is running as good as it can. Checking fuel pressure, servicing filters, check distributor...
    • E
      Eman85 replied to the thread Cylinder head recommendation.
      I haven't adjusted valves with the engine running in 40 years. If you adjust them cold spinning the pushrod between your fingers using...
    • E
      190k and 20+ years things wear out. To check the ball joints jack one side under the lower control arm as far outboard as you can. Take...
    • E
      Eman85 replied to the thread Cup holders.
      They made an insert for the frt. compartment that is a cup holder instead of a CD holder. My pickup has the stupid CD holder so it's my...
    • E
      Eman85 replied to the thread Cylinder head recommendation.
      The original nuts should be fine, they're self locking as the tops are made to bind on the threads.
    • E
      Eman85 replied to the thread Blue leather seat covers?.
      Thanks, that might be an option.
    • E
      No B pillar trim looks good and tight so does the weatherstrip. I will put some time in on it soon, too many other projects right now...
    • E
      Eman85 replied to the thread Wheel interchange 99 Yukon.
      This Yukon came with 245's will I have any problems if I go up to 265's?
    • E
      Eman85 replied to the thread Ignition problem 98 Yukon SOLVED!.
      If you marked the body of the distributor and put it back in the same spot you can't be a tooth off or it wouldn't run unless you swung...
  • Loading…
  • Loading…

Forum statistics

Threads
118,233
Posts
1,624,538
Members
79,245
Latest member
Dawg
Top