2015 GMC YukonXL- Fox Coilovers

[Nokturnal]

Snow pics. Hood, top of mirror caps, and roofline have matte black accent wrap
Now.

 

[Cadi_Mike]

View attachment 270888 View attachment 270886 View attachment 270887

Snow pics. Hood, top of mirror caps, and roofline have matte black accent wrap
Now.

Damn, definitely saving up for this setup. Looks killer [emoji1360]

Sent from my Pixel 2 XL using Tapatalk

 

[Jeff_]

View attachment 270888 View attachment 270886 View attachment 270887

Snow pics. Hood, top of mirror caps, and roofline have matte black accent wrap
Now.

Looks absolutely killer in the snow. Thanks for sharing.

 

[Cadi_Mike]

@Nokturnal have you considered a roof rack delete? I want to on mine. Not my car in the pic btw

Sent from my Pixel 2 XL using Tapatalk

 

[olyelr]

@Nokturnal have you considered a roof rack delete? I want to on mine. Not my car in the pic btwView attachment 270900

Sent from my Pixel 2 XL using Tapatalk

That rig needs the chrome on the running boards deleted for suuuurrrrrre....

 

[Cadi_Mike]

That rig needs the chrome on the running boards deleted for suuuurrrrrre....

Yepp. Not my truck

Sent from my Pixel 2 XL using Tapatalk

 

[nick14226]

View attachment 270888 View attachment 270886 View attachment 270887

Snow pics. Hood, top of mirror caps, and roofline have matte black accent wrap
Now.

@Nokturnal how did the Nittos do in the snow?

I’ve been able to test the BFG’s around here too. This is when it started, ended up with over a foot.

 

[Nokturnal]

View attachment 271607
@Nokturnal how did the Nittos do in the snow?

I’ve been able to test the BFG’s around here too. This is when it started, ended up with over a foot.

They did really well! I kept the rig in 4High most to the time but didn’t slide or anything all week. In 2WD it’s a different story.

We got about 10” here in the Texas panhandle

 

[Nokturnal]

Still in love with the setup! 10k miles and zero complaints. 90% of my driving is highway at 80-90mph. Nitto G2’s are quiet and smooth. SST and Monroe’s are a soft ride.

 

[Oh Kee Pah]

Still in love with the setup! 10k miles and zero complaints. 90% of my driving is highway at 80-90mph. Nitto G2’s are quiet and smooth. SST and Monroe’s are a soft ride. View attachment 276673View attachment 276674 View attachment 276675

Are those the 18s or 20s? Your signature has 20s listed, but they look BIG man!

 

[Nokturnal]

I’ll have to change my sig I bet it’s my last Denali I had. This XL has 18x9.5 with Nitto G2 295/70/18. They measure a quarter inch under a 35” and are 11.77 wide. Nitto makes them in a non LT that saved me a ton of weight and had an even longer mileage warranty. The tread isn’t quite as deep but I get the look for my highway cruiser and they weigh in at only 50lb which is crazy considering they’re 35’s. The LT versions of the same size tire are almost 20lb heavier per tire. My 5.3 will get up and go! I was so worried about it being an issue with the lift and big wheel tire setup but the forged wheels and non LT really make power and braking a non issue

 

[Oh Kee Pah]

Yep - I thought you had put the 18s on. The rig is looking great!

The LT vs non-LT in the Nitto is certainly considerable weight difference. I totally agree with the decision - if you don't "need" the LT w/10ply then go with similar setup to what you are running.

 

[rebl68]

This looks awesome!!

 

[ItstheHOFF]

Still in love with the setup! 10k miles and zero complaints. 90% of my driving is highway at 80-90mph. Nitto G2’s are quiet and smooth. SST and Monroe’s are a soft ride. View attachment 276673View attachment 276674 View attachment 276675

So what is your full suspension setup again? Can’t find it. I gathered something SST and Monroe shocks. Can I get a break down?

 

[Nokturnal]

Ready Lift SST 4” and replaced non magnetic shocks with new Monroe for a softer ride. Monroe 139104 Front and Monroe 911506 Rear.

 

[Short_Haul]

Well… after reading through this and many other threads regarding suspension setup… I just pulled the trigger on my new kit…

Fronts
King 2.5” remote reservoir Coilovers
Rears
Arnott 3066 air shocks
Xineering OBD/SS magnaride delete kit.

 

[maxpsi]

Could you take some pics of where you had to trim to fit the 35s?

 

[Dustin Jackson]

@Nokturnal Looks great man, can I get a summary of the parts you used?

 

[STORMIN08]

Ready Lift SST 4” and replaced non magnetic shocks with new Monroe for a softer ride. Monroe 139104 Front and Monroe 911506 Rear.

he posted this, just above yours...see #135, YOURS IS #138