2004 6.0 NV4500 Tahoe

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

pwtr02ss

Full Access Member
Joined
Apr 1, 2013
Posts
10,212
Reaction score
20,520
Location
Tennessee
What caused the bubbling.
The bubbling was the reason for painting the hood in the first place. All the ss cars are doing it where the bottom and top are glued. I thought the feather fill would bond to it and we'd have no issues. After grinding down into the smc, I found bubbles in the smc itself. Once I got all of that out, we put resin and mat in there and let it cure for a week. That seems to have worked as it didn't bubble the second time.
 

George B

¯\_(ツ)_/¯
Joined
Feb 5, 2020
Posts
7,619
Reaction score
18,030
Location
Oconomowoc, Wisconsin 53066
The bubbling was the reason for painting the hood in the first place. All the ss cars are doing it where the bottom and top are glued. I thought the feather fill would bond to it and we'd have no issues. After grinding down into the smc, I found bubbles in the smc itself. Once I got all of that out, we put resin and mat in there and let it cure for a week. That seems to have worked as it didn't bubble the second time.
Forgive my ignorance. Is that not a steel hood?
 

pwtr02ss

Full Access Member
Joined
Apr 1, 2013
Posts
10,212
Reaction score
20,520
Location
Tennessee
Forgive my ignorance. Is that not a steel hood?
No, they are smc. Sheet modeled composite. It's very similar to fiberglass but the release agent is in the smc itself vs sprayed on. You have to use smc compliant materials when working with it. The only thing steel on the whole car is the quarters. The rest is plastic or smc. They started using on the corvettes in the early 80s instead of fiberglass
 

randeez

Full Access Member
Joined
Sep 29, 2017
Posts
6,030
Reaction score
18,441
Location
south florida
No, they are smc. Sheet modeled composite. It's very similar to fiberglass but the release agent is in the smc itself vs sprayed on. You have to use smc compliant materials when working with it. The only thing steel on the whole car is the quarters. The rest is plastic or smc. They started using on the corvettes in the early 80s instead of fiberglass
you make my smc bubble :gayfight:
 

Forum statistics

Threads
128,795
Posts
1,805,569
Members
91,779
Latest member
wilburMN
Top