Best way to level my 07 NNBS tahoe?

[RickyFriery97]

ok before i get a full drop kit is there a way to drop just the rear to level it with the front?? its a LT3 no auto ride with stock 20s

 

[soulsea]

Quickest and easiest way to just level the rear that I found on a non-autoride truck is: Part 30014: http://www.mcgaughys.com/tahoe.html

 

[RickyFriery97]

Quickest and easiest way to just level the rear that I found on a non-autoride truck is: Part 30014: http://www.mcgaughys.com/tahoe.html

and that will replace my shocks and coils in the rear? and drop it 2"?

 

[soulsea]

Just the coils I think, no need to change shocks for such a small drop.
I was looking at this kit myself for down the road, here's a listing I found that describes what's included: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=310298176782&viewitem=#ht_2947wt_941

 

[RickyFriery97]

Just the coils I think, no need to change shocks for such a small drop.
I was looking at this kit myself for down the road, here's a listing I found that describes what's included: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=310298176782&viewitem=#ht_2947wt_941

yea it sayd coils and shock extenders
thats kinda pricey for just the rear..

 

[soulsea]

Yup, it isn't cheap.
I haven't found another 2" rear drop kit so if you happen to discover one be sure to share.

 

[RickyFriery97]

Yup, it isn't cheap.
I haven't found another 2" rear drop kit so if you happen to discover one be sure to share.

yea im looking so if i find one ill be sure to share

 

[edgaranah1]

Now theres a leveling kit I would like to c on my yukon some day. hopefully in the near future

 

[07Burb]

A couple months back I asked Norcal SS this very same question for my Burb and he stated "djms are 175 shipped and will work fine in that truck." so you might hit him up. 175 is pretty darn cheap if they're still at that price point He said it's something you can do in the driveway within an hour or less.

 

[RickyFriery97]

A couple months back I asked Norcal SS this very same question for my Burb and he stated "djms are 175 shipped and will work fine in that truck." so you might hit him up. 175 is pretty darn cheap if they're still at that price point He said it's something you can do in the driveway within an hour or less.

damn thats pretty good! im going to message him and ask about that! thanks

 

[07Burb]

damn thats pretty good! im going to message him and ask about that! thanks

no problem. It's definitely on my list of stuff to do but keeps getting pushed down my list with other mod I will definitely do it after I get rims, though

 

[Sweet_N_Low]

Belltech 23301 is a 2-3" for 00-11 w/o autoride. Comes with 1" spacer and bumpstop, don't need a shock ext for 2". I have a brand new set I can dump for $225 shipped

 

[RickyFriery97]

Belltech 23301 is a 2-3" for 00-11 w/o autoride. Comes with 1" spacer and bumpstop, don't need a shock ext for 2". I have a brand new set I can dump for $225 shipped

is it installed on your truck or brand new in box?
can i get some pics of it?

 

[Sweet_N_Low]

is it installed on your truck or brand new in box?
can i get some pics of it?

New in the box. Email for pics?

 

[Hammer450R]

Pics please [email protected]

 

[Sweet_N_Low]

Pics please [email protected]

sent

I have two sets of these if you decide you still want a set Ricky

 

[KMeloney]

Check out my post here for the way I went about lowering/leveling the truck.

http://www.tahoeyukonforum.com/forum/showthread.php?t=26391

 

[Keanen55]

I don't think you need shock extenders. When I did a buddy's truck we just used these:

http://cgi.ebay.com/ebaymotors/DJM-...r_Truck_Parts_Accessories&hash=item1c164d5d62

$180 is pretty reasonable.

 

[KMeloney]

I don't think you need shock extenders. When I did a buddy's truck we just used these:

http://cgi.ebay.com/ebaymotors/DJM-...r_Truck_Parts_Accessories&hash=item1c164d5d62

$180 is pretty reasonable.

I used the Belltech rear 3"-4" springs, which are said to really be 2.5"-3.5" on autoride trucks. I used the 1" spacer, and I also used the shock extenders. There's little doubt in my mind that the shock extenders DO help, at least by putting the shock in a better position. I think the travel extension is beneficial, too.

You can always try it out without them and then add them later. But I think they're a good addition.

 

[NORCAL SS]

autoride shock extenders are needed. if you call belltech up you will be told the same.

if you do not do the 34324 I would do the 5301 springs and buy shock extenders. I really dont like doing the autoride trucks without the shock extenders. Shock angle is much better also with the exenters and without the extenders the truck will keep on trying to lift itself up which in turn will not get the drop you need out of it and the autoride shocks will get killed. I've had a few trucks I've had to fix other shops screw ups when they did the same drop without extenders.