Tonyrodz's Tahoe Build Thread

[Tonyrodz]

I don’t know who cooked that garbage but it don’t look fit to eat.

LoL

Also if you need a hub I got one that’s still good from my front end rebuild.

Shannon

Much appreciated on your kind offer Shannon! I already ordered a Timken from Amazon at a pretty decent price. Thx again--that's what TYF is all about!

Good thing for that big ass axle nut holding the thing together. No your brake pads and caliper weren’t the only thing holding your wheel on….

No kidding! I guess God was my co-pilot today! The whole time I was thinking that wheel was gonna go flying off. It was super loud metal on metal noise going around curves.

I wonder if that had anything to do with your abs issue?
Glad you werent macking it down the freeway at 80!

I was thinking the same exact thing Tony! Great Tonys' (minds) think alike lol. Now hopefully once everything is back together that abs light will go away. I did get it up to about 60 mph too.

damn. never seen one that bad.

I can't tell you how many times in my life I've heard--"I've never heard/seen anything like that before in my life"! I must be special lol. Soooooo happy that wheel didn't go flying off.

 

[Imlow78]

Much appreciated on your kind offer Shannon! I already ordered a Timken from Amazon at a pretty decent price. Thx again--that's what TYF is all about!

No kidding! I guess God was my co-pilot today! The whole time I was thinking that wheel was gonna go flying off. It was super loud metal on metal noise going around curves.

I was thinking the same exact thing Tony! Great Tonys' (minds) think alike lol. Now hopefully once everything is back together that abs light will go away. I did get it up to about 60 mph too.

I can't tell you how many times in my life I've heard--"I've never heard/seen anything like that before in my life"! I must be special lol. Soooooo happy that wheel didn't go flying off.

Tony,

Not a problem. I’m think about listing all
My z71 suspension take off stuff when I lowered mine. But I have cv’s and all kind of stuff. Only reason I did what I did was I also had a hub going out. I thought it was in the driver side but it was on the passenger. LoL

It’s amazing how harmonics will play tricks like that.

Good luck on the repairs my friend!

Shannon

 

[Sparksalot]

Took the truck for a drive today and I heard a very low grinding noise. I thought it was the ds cv axle finally giving up the ghost. The boot has been torn for a few years. Got out and looked underneath, nothing jumped out at me, so I said F it. Drove it about 40 miles round trip. Seemed to be getting louder as I was getting closer to home. Got out and looked at the wheel and noticed the outer edge of the rotor was getting a little scored, so I thought maybe something with the brakes on that side. Get home and take everything apart. View attachment 352350
I started moving the axle around and it started raining these bearings.View attachment 352351
The rotor doesn't look too bad. I'm thinking I might be able to slap the brakes back together without having to clean up the rotor. Suggestions on that?
There's just a little bit of play.

This is when I put the wheel back on. Think there's 3 lugs holding it with them tight.

Hory Sheet!

 

[Tonyrodz]

Tony,

Not a problem. I’m think about listing all
My z71 suspension take off stuff when I lowered mine. But I have cv’s and all kind of stuff. Only reason I did what I did was I also had a hub going out. I thought it was in the driver side but it was on the passenger. LoL

It’s amazing how harmonics will play tricks like that.

Good luck on the repairs my friend!

Shannon

Thx buddy. Hub doesn't get here til Thursday, so she's laid up til then.

 

[OR VietVet]

Tony,

Not a problem. I’m think about listing all
My z71 suspension take off stuff when I lowered mine. But I have cv’s and all kind of stuff. Only reason I did what I did was I also had a hub going out. I thought it was in the driver side but it was on the passenger. LoL

It’s amazing how harmonics will play tricks like that.

Good luck on the repairs my friend!

Shannon

Turns out that a member at the American Legion I go to has a wife with a 2005 LS Tahoe that bought 95% of all the still good parts on my rig that I swapped out when I did my rebuild that is in the Build Thread here. I was very surprised that she had a hydroboost instead of a vacuum boost on her LS model.

 

[pwtr02ss]

Wow Tony, you're lucky it made it home!

I bet this fixes your ABS issue. Check the other side if you haven't replaced it recently. They tend to lay down around the same time

 

[Tonyrodz]

Wow Tony, you're lucky it made it home!

I bet this fixes your ABS issue. Check the other side if you haven't replaced it recently. They tend to lay down around the same time

I'd like to, but now is not a good time($$). I replaced one maybe 6-7 years ago. Not alot of mileage since then. Wish I could remember which side I did.

 

[Tonyrodz]

Got the hub a day early. Hopefully the weather will hold on Saturday--of course it's supposed to rain Saturday AND Sunday.
Gonna try this--

 

[OR VietVet]

I have never seen that way of doing it but makes sense for sure. A must to know in the rust belt. Good luck @Tonyrodz. Do some pics along the way or even a video.

 

[Sparksalot]

Got the hub a day early.View attachment 352670 Hopefully the weather will hold on Saturday--of course it's supposed to rain Saturday AND Sunday.
Gonna try this--

Ugh rust. I’ve done 4 now. They all fell out after the three bolts were removed.