Just Fishing
Can't fix stupid
These are the ones i bought,
https://www.ebay.com/itm/Hummer-GM-...otor-Mount-Torque-Strut-25847739/263071877011
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
These are the ones i bought,
https://www.ebay.com/itm/Hummer-GM-...otor-Mount-Torque-Strut-25847739/263071877011
I got the echo trimmer 2 years ago, love that too. Especially the fast line load gimmick.
Just Fishing
Can't fix stupid
called the machine shop to ask about my assembly balance.
Figured with my luck it was sitting there ready but nobody got around to picking up the phone.
nope, but they said they would get to it the first of next week.
I need to check the clearance/gap on the piston rings.
I really need one of my pistons in order to square it up.
Read I could use a bolt...
Maybe i'll try that...
It's going to be another boring weekend for me.
Wife is abandoning me too, so probably yard work and
Figured with my luck it was sitting there ready but nobody got around to picking up the phone.
nope, but they said they would get to it the first of next week.
I need to check the clearance/gap on the piston rings.
I really need one of my pistons in order to square it up.
Read I could use a bolt...
Maybe i'll try that...
It's going to be another boring weekend for me.
Wife is abandoning me too, so probably yard work and
Lol. I was just sitting in my Silverado trying to post but my phone was jumping around in my hand so bad I kept hitting the wrong keys. The cam I installed has so much lope it’s crazy. I don’t care about smooth, I wanna know I have a V8.
Just Fishing
Can't fix stupid
Watched some youtube video about valve springs today.
THey mentioned the overhead claw type compressor i have, and said don't use it.
apparently it can damage the springs or some nonsense.
they also said to toss springs if you drop them on the floor.
Yeah so i totally just ordered this type of valve spring compressor for my new springs.
Video:
THey mentioned the overhead claw type compressor i have, and said don't use it.
apparently it can damage the springs or some nonsense.
they also said to toss springs if you drop them on the floor.
Yeah so i totally just ordered this type of valve spring compressor for my new springs.
Video:
Geoffsfas10
Full Access Member
nice thats the side i need too. should do them both but we'll see. guessing the h3 mount is a solid/traditional mount? i didnt think my NBS felt too bad at idle.
Just Fishing
Can't fix stupid
I also opened my box of "gm" springs that i got from summit...
I was expecting some sort of "gm" type badging.
Just a boring box, and each spring inside of that box is bagged with a "made in Mexico card"
Yeah, i paid extra for the "GM" ones.
I was expecting some sort of "gm" type badging.
Just a boring box, and each spring inside of that box is bagged with a "made in Mexico card"
Yeah, i paid extra for the "GM" ones.
Someone will confirm, but I think the H3 passenger side mount is good for either side of these rigs.
Just Fishing
Can't fix stupid
for our trucks, both sides are the same pn as i posted.
And yes, solid mount.
as for how it feels, no idea!
mine are still in a box.
I look at it as "i don't want to do it again any time soon"
but my driver side was totally shot when i removed it.
I never noticed anything.
Last edited:
Tonyrodz
Resident Resident
Gotta figure out some center caps.
Never saw that coming.. [emoji1787]Well my retrofit lasted a half day and I decided to rebuild them again. I got some dust in one after the lens was already baked on so I was planning to open it up and clean it. But I’m kinda regretting not having the new projectors etched like the first ones so I ordered another set, with etching, and 4 matching 6000 bulbs. Another $180 of my stimmy money down the drain. I’ll get these things right one day.
Very nice!
Truth
Geoffsfas10
Full Access Member
Cool thanks for the info. Yeah looking at them, they look like they are gonna be a ***** to get toofor our trucks, both sides are the same pn as i posted.
And yes, solid mount.
as for how it feels, no idea!
mine are still in a box.
I look at it as "i don't want to do it again any time soon"
but my driver side was totally shot when i removed it.
I never noticed anything.
kbuskill
***CAUTION*** I do my own stunts!
To each his own said the farmer when he kissed the cow... lol
I personally can't tell the difference but my hydraulic mount was busted on the driver's side so maybe I was used to more vibration, although it isn't something I notice.
In all fairness, I only replaced the drivers side mount with the H3 mount so my truck is half H3 solid mount and half hydraulic mount... so I guess my truck is a hybrid of sorts.... lol
Maybe it only transmits half the vibration that way.
I figured since the driverside is the one that sees most of the abuse that it would be fine.
I also don't plan on trying any @Rocket Man burn outs in reverse either so the passenger side mount should last a long time.
kbuskill
***CAUTION*** I do my own stunts!
Yes, the mounts you want are for the H3 Alpha which came with the 5.3l.
The passenger side mount for the H3 is the only one that will fit our trucks and it fits both sides of our trucks.
Yes, they are a traditional solid rubber mount as opposed to the oil filled ballons our rigs came with.
swathdiver
Full Access Member
Yep, same for both sides.
Hummer - 25847739
I gave Rock Auto my business tonight instead of Amazon. They were twenty cents less too! Won't be here in an hour but I won't need them until next week. All three OE mounts on the way.
Yeah well sometimes it takes me 2-3 times (or more) to do something until I’m happy with the outcome. I try not to do it too much, it gets expensive. I’ll probably end up starting with another new set of Depos one day and building my own design that’s never been done. There’s some new projectors and other bits coming every day it seems. ***** $$$ though. I probably have $700-$800 into these for parts and materials by now.
