What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Rocket Man]

I also don't plan on trying any @Rocket Man burn outs in reverse either so the passenger side mount should last a long time.

You really should experience it.

 

[gat0r]

View attachment 276588

they need a wakizashi for the drift e-brake

 

[Greg Kulbick]

Well, she helped me do the test. She was just upset that she couldn't release the brake while I was in front of the vehicle looking at the motor. For some reason if I'm in the driveway when she's pulling in she tries to run me over.

Oh, and the GM OE mounts are only $87 each at RA, about the same price as the H3 mount

Here's a video I took of the engine revving, and it makes the "thud" noise that I can hear inside the vehicle when it reaches the top

As someone who noticed the noise, then stopped driving it because the wife took it over and I forgot about it, that thing is barely moving.

 

[BG1988]

Yep, same for both sides.


Hummer - 25847739

I gave Rock Auto my business tonight instead of Amazon. They were twenty cents less too! Won't be here in an hour but I won't need them until next week. All three OE mounts on the way.

you did find your self a 5% code too correct?

 

[Sparksalot]

Yep, same for both sides.


Hummer - 25847739

I gave Rock Auto my business tonight instead of Amazon. They were twenty cents less too! Won't be here in an hour but I won't need them until next week. All three OE mounts on the way.

What is the number on the rear mount?

 

[Rocket Man]

What is the number on the rear mount?

You mean the transmission mount? That’s the only other one, there’s just 2 motor mounts.

 

[Sparksalot]

You mean the transmission mount? That’s the only other one, there’s just 2 motor mounts.

Yes. Third/transmission. The other part of the triad.

 

[Rocket Man]

Yes. Third/transmission. The other part of the triad.

Just never heard it called a rear mount.

 

[gooffeyguy]

Is the factory trans mount hydraulic?

Sent from my SM-G930V using Tapatalk

 

[Doubeleive]

Is the factory trans mount hydraulic?

Sent from my SM-G930V using Tapatalk

I don't think so it's just a solid rubber mount

 

[swathdiver]

What is the number on the rear mount?

There are different numbers for RWD and 4x4s and my 4x4 had two numbers come up across different sites. I bought this one and will see if I was right!

15840278 Some sites said 15840277.

Tom, it doesn't appear large enough to be a fluid filled mount.

 

[swathdiver]

you did find your self a 5% code too correct?

Every time!

 

[swathdiver]

Wife took the truck to Orlando the other night for my grandson's surgery. He's fine, just needed to fix his being "tongue tied". Well this morning at breakfast she tells me that the rear liftgate applique for the camera was falling off the back hatch and she pushed it back in place. What!? Daughter went outside and said that it looked like some jerk tried to pry it off with a screwdriver and we figured that the alarm scared him off from completing his nefarious deed. New ones are $480+. I bought parts of two to make a new one for way less than half of that off ebay a little while ago.

The rear camera is not clicked or bolted into place, it is melted into place! Can't be re-melted so we'll have to use nuts and bolts to secure it this time.

The applique has this chrome Putco piece over it, I left it on for greater visibility, you would be surprised at how many of these things are rear ended when you read Car Faxes all day. But the plastic chrome was starting to bubble anyway and plan to leave it off. That handle below is also covered in chrome and we'll leave that for now. Need to pick up some more RTV for a temporary fix until the parts come in.

 

[gooffeyguy]

Wife took the truck to Orlando the other night for my grandson's surgery. He's fine, just needed to fix his being "tongue tied". Well this morning at breakfast she tells me that the rear liftgate applique for the camera was falling off the back hatch and she pushed it back in place. What!? Daughter went outside and said that it looked like some jerk tried to pry it off with a screwdriver and we figured that the alarm scared him off from completing his nefarious deed. New ones are $480+. I bought parts of two to make a new one for way less than half of that off ebay a little while ago.

The rear camera is not clicked or bolted into place, it is melted into place! Can't be re-melted so we'll have to use nuts and bolts to secure it this time.

The applique has this chrome Putco piece over it, I left it on for greater visibility, you would be surprised at how many of these things are rear ended when you read Car Faxes all day. But the plastic chrome was starting to bubble anyway and plan to leave it off. That handle below is also covered in chrome and we'll leave that for now. Need to pick up some more RTV for a temporary fix until the parts come in.

Does your dash cam have a rear camera and did it catch anything?

Sent from my SM-G930V using Tapatalk

 

[Rocket Man]

Wife took the truck to Orlando the other night for my grandson's surgery. He's fine, just needed to fix his being "tongue tied". Well this morning at breakfast she tells me that the rear liftgate applique for the camera was falling off the back hatch and she pushed it back in place. What!? Daughter went outside and said that it looked like some jerk tried to pry it off with a screwdriver and we figured that the alarm scared him off from completing his nefarious deed. New ones are $480+. I bought parts of two to make a new one for way less than half of that off ebay a little while ago.

The rear camera is not clicked or bolted into place, it is melted into place! Can't be re-melted so we'll have to use nuts and bolts to secure it this time.

The applique has this chrome Putco piece over it, I left it on for greater visibility, you would be surprised at how many of these things are rear ended when you read Car Faxes all day. But the plastic chrome was starting to bubble anyway and plan to leave it off. That handle below is also covered in chrome and we'll leave that for now. Need to pick up some more RTV for a temporary fix until the parts come in.

I hate thieves. Really hate them. Nope you can come up with a fix James.

 

[swathdiver]

Does your dash cam have a rear camera and did it catch anything?

Sent from my SM-G930V using Tapatalk

Yes it does but my dear wife left it running and whatever it may have captured has been taped over by now.

 

[FrankU]

Yes it does but my dear wife left it running and whatever it may have captured has been taped over by now.

She must know my wife.

 

[Sam Harris]

Yes it does but my dear wife left it running and whatever it may have captured has been taped over by now.

I put a 256GB sd card in. This way, by the time I figure out that I need to look through the videos, I should have a pretty good cushion.

 

[swathdiver]

I put a 256GB sd card in. This way, by the time I figure out that I need to look through the videos, I should have a pretty good cushion.

Mine is half that, have to make sure this camera can take one that big, my last one could not. I lost some great footage of cops busting a drug dealer once right in front of me because the cards were only 32 GB!

 

[Sam Harris]

Mine is half that, have to make sure this camera can take one that big, my last one could not. I lost some great footage of cops busting a drug dealer once right in front of me because the cards were only 32 GB!

Damn!! That’s a huge bummer! That’s the maximum size for my camera. Obviously need to check that first..!