2015 GMC YukonXL- Fox Coilovers

[Nokturnal]

Looks awesome @Nokturnal , looking forward to seeing more pics!

If you think of it when picking it up, please ask the shop if they had any trouble installing the upper rear coil spring isolators. My install shop tells me they wouldn't go, ReadyLIFT is telling me they should be on there and definitely fit their spacers. If yours went on, I'll know who's right

I’ll definitely ask when I pick it up. They’re doing the trimming today for the 35’s to clear and then I should be able to pick it up and get measurements and more pics

 

[Nokturnal]

Upper rear isolators on with no issues here.

Currently on a little highway trip
And so happy with the ride! I’ve been in such a rush today i haven’t been able to put a tape measure to the fenders but I’m guessing 42” front and back. That’s with the 35” tires so makes sense that it would sit a little higher at the fender. Tomorrow I’ll for sure post some measurements. Ride quality is def Better than the Fabtech budget kit I had.

 

[nick14226]

Upper rear isolators on with no issues here.

Currently on a little highway trip
And so happy with the ride! I’ve been in such a rush today i haven’t been able to put a tape measure to the fenders but I’m guessing 42” front and back. That’s with the 35” tires so makes sense that it would sit a little higher at the fender. Tomorrow I’ll for sure post some measurements. Ride quality is def Better than the Fabtech budget kit I had. View attachment 268495View attachment 268496

Thanks for checking, sounds like I have some more arguing to do.
Can’t believe you were able to get 35’s in there with some offset, looks AMAZING

 

[STORMIN08]

that stance is perfect ( and i dont mean the offset of the wheels), stance is how the truck sits, and yours nailed it.

 

[BlackYukon]

Upper rear isolators on with no issues here.

Currently on a little highway trip
And so happy with the ride! I’ve been in such a rush today i haven’t been able to put a tape measure to the fenders but I’m guessing 42” front and back. That’s with the 35” tires so makes sense that it would sit a little higher at the fender. Tomorrow I’ll for sure post some measurements. Ride quality is def Better than the Fabtech budget kit I had. View attachment 268495View attachment 268496

That Looks awesome, man. Very elegant. How much trimming to fit the 35's?

 

[Nokturnal]

Heavier plastic trimming was done to accommodate the 35’s. No metal trimming however. The vehicle doesn’t run any at full lock on flat surfaces. I do have a little rub when hitting inclined:declined surfaces slightly when turning.

Front Fender measured 41”. Rear Fender measured 41.5”. This is with the Monroe front struts and Monroe Rear shocks (bypassing autoride). And yes I agree, the PERFECT stance. Very subtle rake and when I throw some weight in the back it sits level. I honestly wouldn’t mind another 1/4-1/2” of wheel offset but it doesn’t bother me. I’m pretty sure my OCD will kick in and next time I buy tires I’ll go 20x10 -24. To me that would be the perfect! (current wheels 9.5 wide and -18).

Like I said though, ride is SUPERB for my taste. The perfect highway queen that saw no decrease in ride quality over the soft factory riding setup. My Speedo is off by 8mph but I’ll be hitting up Blackbear.

Already received compliments on it at Lowe’s and Advanced Auto Parking lots

 

[Cadi_Mike]

Heavier plastic trimming was done to accommodate the 35’s. No metal trimming however. The vehicle doesn’t run any at full lock on flat surfaces. I do have a little rub when hitting inclined:declined surfaces slightly when turning.

Front Fender measured 41”. Rear Fender measured 41.5”. This is with the Monroe front struts and Monroe Rear shocks (bypassing autoride). And yes I agree, the PERFECT stance. Very subtle rake and when I throw some weight in the back it sits level. I honestly wouldn’t mind another 1/4-1/2” of wheel offset but it doesn’t bother me. I’m pretty sure my OCD will kick in and next time I buy tires I’ll go 20x10 -24. To me that would be the perfect! (current wheels 9.5 wide and -18).

Like I said though, ride is SUPERB for my taste. The perfect highway queen that saw no decrease in ride quality over the soft factory riding setup. My Speedo is off by 8mph but I’ll be hitting up Blackbear.

Already received compliments on it at Lowe’s and Advanced Auto Parking lots View attachment 268522View attachment 268523

Dude that looks amazing. Very nice

Sent from my Pixel 2 XL using Tapatalk

 

[Cadi_Mike]

@Nokturnal have any more pics? Love your setup and wanting more motivation for my truck!

Sent from my Pixel 2 XL using Tapatalk

 

[Nokturnal]

@Nokturnal have any more pics? Love your setup and wanting more motivation for my truck!

Sent from my Pixel 2 XL using Tapatalk

She’s going to the PDR spot Monday for some small door dings but I’ll grab some photos ASAP. I was almost convinced I was going to go Matte White wrap for the entire vehicle but now after seeing the black on black I may experiment with some matte/Satin black accents and keep the gloss black for a bit.

 

[Nokturnal]

Black Headlights finally came in as well!

 

[nick14226]

@Nokturnal, I’m sold now on the amp steps too after seeing yours, gives it that little bit of extra height. Had them on my F150, been kicking it around for a while...

 

[nick14226]

Ugh...I ordered direct from AMP. Thanks for the tip!

@DADW4GN , in case you’re still in the market for the amp steps (and can cancel your order), there are a couple available on Amazon prime right now and they just dropped the price a bit, seems like a decent deal from what I’m seeing, plus the $100 amp rebate.

 

[DWTahoe]

Do you have a part number for amp power steps that fit something other than the pickup trucks? I may have missed it, but I don't see a version that fits tahoe/Yukon. Thanks.

 

[nick14226]

Do you have a part number for amp power steps that fit something other than the pickup trucks? I may have missed it, but I don't see a version that fits tahoe/Yukon. Thanks.

P/N 76127-01A-B
Fit all of the 2015-2020 SUV’s, appears for Tahoe and Yukon they need to be cut shorter, suburban and Yukon xl ready to go.

 

[Nokturnal]

Black Headights aren’t on yet but here are some more pics.

Once I get the new headlights installed and some of the matte black accents I’ll
Get some more pics. I just noticed the pics were on a slanted drive too but I’ll go flat ground photo shoot next time

 

[Nokturnal]

 

[Oh Kee Pah]

You guys are killing it on this thread! - Seriously, I'm inspired.

Still have some tweaks to do; I'm trying to get my stuff together so I can post a full write up about the v3.0 Tahoe. Sitting at 42.5" at the front fender and need to bring it down a little bit.

BUT, wanted to get you all a teaser photo...




Safe Travels!

 

[STORMIN08]

NOKTURNAL....LAMIX FILM ON THE FOGS ???? looks good in that color

 

[Nokturnal]

NOKTURNAL....LAMIX FILM ON THE FOGS ???? looks good in that color

yes sir. I like how they pop and match the amber corner lense on the headlight. Went back and forth on whether I should’ve gone smoked or kept clear....but it’s hard to resist the off-road fog look. I’m also a Univ of Texas alum so you know I always dig me some orange.

 

[DADW4GN]

@DADW4GN , in case you’re still in the market for the amp steps (and can cancel your order), there are a couple available on Amazon prime right now and they just dropped the price a bit, seems like a decent deal from what I’m seeing, plus the $100 amp rebate.

Mine finally arrived yesterday, lol. I was real patient with the supplier. I work in the freight industry and things are upside down right now. All in including the manual toggle and OBD splitter I was at $1437.30 shipped.

Thanks for looking out though!