Moon roof

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ben Solo

TYF Newbie
Joined
Sep 5, 2020
Posts
22
Reaction score
9
Hey there, I gotta 05 Tahoe Ls and I was wondering if anyone has knowledge on how to remove the sliding cover part of the moon roof before i mess it up? Mine needs to be taken off to reglue the fabric. Lmk please thanx
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,881
Reaction score
2,499
Location
Virginia
I’m not much help on this one but others will chime in. Welcome to the forum from Virginia.
 

ivin74

05 NBS Nali
Joined
Aug 3, 2014
Posts
2,420
Reaction score
2,557
Location
Htown, Texas
Hey there, I gotta 05 Tahoe Ls and I was wondering if anyone has knowledge on how to remove the sliding cover part of the moon roof before i mess it up? Mine needs to be taken off to reglue the fabric. Lmk please thanx



Please see the video on the link below. Before you remove the T25 bolt make sure you mark their location with a grey sharpie. This is very important, because you need to put those bolts in the same location when you re-install the glass. You also need yo remove all 4 compression clips, be extremely carefully they break easily. The final step is removing the brace that stops the cover, that brace keeps the cover in place. Its held by two rubber bushings on each end, to remove it, push the end towards the back of the suv then pull up. Do that to both sides and the cover can now slide out.

Ihttps://youtu.be/XV5jxBib3Dg
 
Last edited:

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,185
Reaction score
51,399
Location
Central Jersey
Please see the video on the link below. Before you remove the T25 bolt make sure you mark their location with a grey sharpie. This is very important, because you need to put those bolts in the same location when you re-install the glass. You also need yo remove all 4 compression clips, be extremely carefully they break easily. The final step is removing the brace that stops the cover, that brace keeps the cover in place. Its held by two rubber bushings on each end, to remove it, push the end towards the back of the suv then pull up. Do that to both sides and the cover can now slide out.

Ihttps://youtu.be/XV5jxBib3Dg
 

Forum statistics

Threads
137,759
Posts
1,991,301
Members
102,742
Latest member
CKendrick
Back
Top