What did you do to your OBS GMT400 Tahoe/Yukon Today?

[Dneel81]

She's got no front brakes, no front driveshaft, and no front differential oil.
But she's standing on her own.
Got the longer brake lines made today, the black RTV is drying on the diff cover and the measurements are in for the front CV shaft.
If I can get the exhaust rebent around the front shaft and the spring hangers, I'll be close to having this thing done the way GM shoulda given them to us.

 

[tyrone27]

Damn truck broke down. Had to get it towed. Replaced the fuel pump and no start. Then filter wouldn't come off ended up stripping the nuts off the filter then just cut the line and put a fuel line in. Still no start. Hour later after I'm reading through the forum to figure it out wife hops in and it starts no problem. I got mad and got a beer. And tomorrow I'm replacing the ignition control module just to be sure.

Sent from my SM-N910T using Tapatalk

 

[99YukonSLT]

Found some off the beaten path roads in southern OH with some of my Subaru buddies this weekend. Got a little muddy. Only needed 4H once in sticky wet clay. Was fine in 2wd or auto4w most of the time.

 

[th3 shifty]

i changed out my steering box with a rebuilt unit from "vatoZone".. seems like now the steering is super light

 

[99YukonSLT]

Started removing my running boards, had no idea these things were so damn heavy. Need to get it in for a wheel/tire balance and alignment

 

[DallasTahoe]

Picked up a mint skid plate from the junkyard for $4.99! Just gotta clean off the grime and bolt it up!


Sent from my iPhone using Tapatalk

 

[ss444]

Replaced the battery, will be doing front disc pads and rotors this weekend.

 

[eswarden]

Swapped in a new cam, lifters, rockers. Updated my tune from Blackbear. Got a nice little lope now

Sent from my LG-D850 using Tapatalk

 

[noJeepshere]

The radiator gave up the ghost so I towed it home with the new truck.

sent from a slablet

 

[noJeepshere]

Fixed it.

sent from a slablet

 

[Goodinblack]

Nominations for April 2017 Truck of the Month.

http://www.tahoeyukonforum.com/thre...ed-by-gotrinova-com-detailing-products.91728/

Sponsored by GoTriNova Detailing Products.

 

[04SS99Denali]

new radiator and lower hose. also changed the idler pulley

 

[99YukonSLT]

Tore out the cargo area carpet b/c it was starting to stink and was damp from I don't know what. Got all the bolts for the rear seats out but one that was rusted in and had to be ground off. Gonna tear out the front seats and front carpet tonight in preparation for cleaning, vacuum the interior, and clean the seats.

Still debating on POR15 for the interior floor or truck bed liner. I'm gonna reuse the front carpet, just clean it really good and put black vinyl flooring in the rear. Getting new floor/cargo mats while I'm at it. My old ones are trashed.

 

[skychair]

Tore out the cargo area carpet b/c it was starting to stink and was damp from I don't know what. Got all the bolts for the rear seats out but one that was rusted in and had to be ground off. Gonna tear out the front seats and front carpet tonight in preparation for cleaning, vacuum the interior, and clean the seats.

Still debating on POR15 for the interior floor or truck bed liner. I'm gonna reuse the front carpet, just clean it really good and put black vinyl flooring in the rear. Getting new floor/cargo mats while I'm at it. My old ones are trashed.

Just replaced the carpet in my 99 Yukon.
Rear side windows will leak, had to have one removed and replaced before doing the carpet.
I intend to do the same on the drivers side latter this summer.
The paint separates from the metal under the window, GMC no longer paints this area.....according to the glass repair man.

 

[DallasTahoe]

Put on new brake drums, shoes, and new hardware in effort to rid my Yukon of a chirp. Also put on a new set of shoes[emoji41]

Sent from my iPhone using Tapatalk

 

[Jazz]

The first few things of a very long list.

Replaced the rear drums in their entirety. (That was interesting). Got rid of the OBS Master Cylinder and got a 2002 one for a firmer brake pedal.

Upper and Lower ball joints, upper control arms and all the bushings, both side. Removed the molding on the doors.

About to plasti-dip the whole thing and install a CB.

 

[1BADI5]

Fresh tank of gas and added some Royal Purple fuel treatment and finished my catch can.

 

[Creese99]

I changed out the steering motion sensor. Took about 20 min. It's under the dash on the column. Steering improved better than it has ever been. The steering will get erratic on slight bends at 40-50 mph. Not fun. I guess they go bad more often than you think.

 

[rolfsent]

So it's been a very long time since I've been on this forum. But I've since sold my 1997 Yukon about a year ago and for the last 8 months I've been working on a new to me 1997 Suburban. I know it's not a Tahoe or Yukon but it basically is. So here's what I've done:

1997 GMC Suburban SLE
4x4 3.73 and G80
211k miles

In the last few months.
Spark plugs,air filter, fuel filter, Brakes all around, shocks all around, AC Compressor, new heater hoses, rear axle seals and bearings, new u-joint, new tires, all new lights for the front.

In the last week I replaced the front bumper with a diesel bumper and rear rusty bumper was replaced and I added a sweet but very 90's style Audiovox center console with a built in tv!

 

[RicanGM]

Clean looking Burban, am digging the bumper