What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[iLikeEggs]

Trailerin' all weekend!

 

[93blkongreenpro]

Damn, you guys drive down to metal.... I seriously never do.... if i feel a single pulse or hear a squeak i pad slap it and move on.....im not being a dick just my feelings....ya know? i hate when brakes feel like shit or i hear shit rubbing, i pull the wheels and bend backing plates sometimes....i keep saying i cant stand hearing brakes...but it bugs the shit out of me......lol

Lol. Other side . It started squeaking on a Saturday and I was 200 miles from home. Never did pulse.

Sent from my SM-G955U using Tapatalk

 

[Regency]

Wow. I am surprised you still have that truck. Long time no see

Sent from my SM-N910V using Tapatalk

Yep! Ten years she's been around...


Dropped her off to get painted today!

 

[08grey]

Stock redcat Rampage Xte, so the 980kv brushless, 150a brushless esc and two aftermarket 5700mah 3s 40c lipo. It's 1/5 scale. I have a Rampage MT with the 32cc 2 cycle motor but the steering servos were not working.

If the specs of your savage match or come close to the XTe or a Traxxas Xmaxx, I don't see why not. I would watch motor temps.

Sent from my SM-G955U using Tapatalk

Edit: Google's the hpi savage 25, and my biggest concern would be burning the clutch out since it is nitro. And the low weight with it being 1/8 scale. My kid weighs 33 lb. It may pull your kid fine. I don't do much with nitro bc of the cost of fuel, so I went 2 cycle.

Thanks. [emoji106]

Sent from my SM-G950U using Tapatalk

 

[05Single]

You can't tell in this picture but I washed and then buffed out all the nastiness from this past winter and then took a drive out to the beach that evening.

Ha! Beach ...don't make me laugh.

 

[PG01]

I put i the leds i bought the other day so while i was back there I pulled the appliqués and did some cleanin'.....ill see what them there backem up leds do later on....
Befo

Afta

Befo

Afta

All buttoned up

 

[tsuintx]

Damn, you guys drive down to metal.... I seriously never do.... if i feel a single pulse or hear a squeak i pad slap it and move on.....im not being a dick just my feelings....ya know? i hate when brakes feel like shit or i hear shit rubbing, i pull the wheels and bend backing plates sometimes....i keep saying i cant stand hearing brakes...but it bugs the shit out of me......lol

Gotta remember, the Tahoe is my wife's ride and I only drive it once or twice a month. First time she mentioned anything was this past Saturday.

Good thing is, that it actually looks like that the new front&rear sets will be here already on Friday, so I guess I know what I'll be doing on Saturday.

 

[aflumb]

Well i got to drive the Tahoe to work today. (this only happens like once every couple months). Well, after getting home i proceeded to do the following:

Change the oil
Grease the front end
Rotate the tires
Clean the wheel wells
and take a pic of the inclines from Tony to see if it is installed correctly.

So this is a pic of the riverside rear sway bar end link looking from the rear to the front. The grease zeros are on the inside. been like this since i got them but it always seemed wrong. am i right thinking this. It is the same as the pass-side if turned around.

 

[juan84]

Well i got to drive the Tahoe to work today. (this only happens like once every couple months). Well, after getting home i proceeded to do the following:

Change the oil
Grease the front end
Rotate the tires
Clean the wheel wells
and take a pic of the inclines from Tony to see if it is installed correctly.

So this is a pic of the riverside rear sway bar end link looking from the rear to the front. The grease zeros are on the inside. been like this since i got them but it always seemed wrong. am i right thinking this. It is the same as the pass-side if turned around.

Looks like passenger side link!!

sent from galaxy s6

 

[PG01]

Had to do this......to get inspected...........

 

[Kenny D]

Why don't you just go legal?

 

[#1taho]

Had to do this......to get inspected...........

View attachment 83459View attachment 83460

That is a ****** deal !!!

 

[2011SSVHOE]

I Just got my oil changed and NC state Inspection done at my local Chevy Dealer, Bill came to 59.00. He called and said that I need rear brake pads. I asked if it would still pass Inspection he said sure no problem, but if you stand on the brakes they will be metal to metal. He offered to show me the pads but I was across the street having a Cold Adult Beverage or three. It sounds like a Saturday job in the fall. Must not be too bad if it passed Inspection IDK!

 

[93blkongreenpro]

Had to do this......to get inspected...........

View attachment 83459View attachment 83460

We normally roll the front windows down and pull the fuse.

Sent from my SM-G955U using Tapatalk

 

[PG01]

Why don't you just go legal?

Legal now is pretty close to having nothing so useless

 

[PG01]

We normally roll the front windows down and pull the fuse.

Sent from my SM-G955U using Tapatalk

The guy i go to is good if you know what i mean but he got fined by NYS and doesn't want to pay out again. Ill put it back on , its just annoying more than anything else.. actually told my wife im going to hit the junkyard and get the two front door glass and swap it out for next year. The tint had a few nicks in it from i dont know what and ive wanted to redo it anyway. Ill deal for few weeks until i go buy more tint.

 

[PG01]

Ha! Beach ...don't make me laugh.

Why? Its a beach right? Beach is a beach

 

[93blkongreenpro]

The guy i go to is good if you know what i mean but he got fined by NYS and doesn't want to pay out again. Ill put it back on , its just annoying more than anything else.. actually told my wife im going to hit the junkyard and get the two front door glass and swap it out for next year. The tint had a few nicks in it from i dont know what and ive wanted to redo it anyway. Ill deal for few weeks until i go buy more tint.

I just took my 20 off and put 35 on the front doors. 70 on the windshield and 5 over factory

Sent from my SM-G955U using Tapatalk

 

[07Burb]

Drove it

 

[Drok]

Had to do this......to get inspected...........

View attachment 83459View attachment 83460

Aww man...

Ive peeled many a tint off windows, it sucks to do