Mechahead
Member
Nice. I have been looking for a way to set up a different holster in my truck. I had one under the steering column but just didn't care for it. Plus it didn't hold any extra mags.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Nice. I have been looking for a way to set up a different holster in my truck. I had one under the steering column but just didn't care for it. Plus it didn't hold any extra mags.
Rangel
Full Access Member
I just took a kydex holster and mag pouch and screwed them into the console. Luckily I had a small drill and short bit. Not very much room in the console.
I've got 82 rounds on tap like this plus any other mags I have.
I've got 82 rounds on tap like this plus any other mags I have.
Red_Raider
Full Access Member
Great idea! I've been thinking about something like this instead of the clip in the console lid.
Up Date still leaks I going to put in a new oil pressure switch before I pull the trans out.
cybertek
Member
Rangel
Full Access Member
scoobyxj
Full Access Member
- Joined
- Oct 24, 2013
- Posts
- 176
- Reaction score
- 3
Was the middle row bench ever an option with third row? I snagged a bench out of an 04 with the tan leather, and I was surprised to see it was also third row.
It belonged to a private cab company, and the mechanic said they bought it that way, but they bought it used, and only had it for a month when the driver rolled it twice. ****** part was it was a sharp looking Hoe. Had some nice looking 20s on it and was pretty much fully loaded.
It belonged to a private cab company, and the mechanic said they bought it that way, but they bought it used, and only had it for a month when the driver rolled it twice. ****** part was it was a sharp looking Hoe. Had some nice looking 20s on it and was pretty much fully loaded.
Bought a 6-inch Skyjacker lift since I got a nice offer from 4wheelonline. I was planning to get 4" lift but my friends recommended the 6" instead. My next upgrade would be 35" tires.
doylee4693
Tahoe User
Yes my 01 tahoe had 3rd row seats and had second row bench seating, figured I would chime in.
JochenWoern
Full Access Member
^ Same on my 04 YUKON.
Bomba02
Full Access Member
- Joined
- Mar 27, 2013
- Posts
- 371
- Reaction score
- 9
Developed a clunk in the rear, inspected and found this, come on....
Red_Raider
Full Access Member
Damn that sucks!
I' repromged my remotes so now I have 2 working remotes again.
I' repromged my remotes so now I have 2 working remotes again.
JesusArTorres
Full Access Member
i also preferred the chrome rims over the kmc rockstars. I think a black wheel would look nice on there, but i just dont like the rockstars, mainly because the only people who run them in the houston area are highschool kids who are spoiled rotten or kids fresh out of college with a oil and gas job making money and wanting to spend it. and then they drive like dbags
---------- Post added at 09:39 AM ---------- Previous post was at 09:17 AM ----------
here are a couple shots of the DRL replacements i got.
this is at night when unlocking it
during the day with the truck in drive
also added a relay harness for the HID's stopped the flicker i was getting as well as made the light pattern better overall. I dont think the HID's were firing completely off the stock wiring.
What headlights are those?
Big Buttons
The SS Burb
Depo projectors. also come in black
The 'ER
Full Access Member
Developed a clunk in the rear, inspected and found this, come on....
Had the same thing happen with my lift kit 2 weeks after install and rough country NDA me a new link at no charge.
what big buttons said.
119 off amazon with prime shipping. Depo 335-1119PXAS
my Spyder LED red tails come in today. I will be putting those in along with some new LED projector reverse bulbs i got http://www.ebay.com/itm/201097332163?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT I have some similar bulbs in my GTOs and they work and look great.
i tested out using some of the panels that broke apart on that LED DRL i had and soldered them to some festoon adapters i had laying around. the light output was nice, but it was more around the 4000k color level vs the 6000k of the interior bulbs on the truck. so i threw them into my pile of stuff.
JesusArTorres
Full Access Member
Thanks. Let me know how those LEDs work, I've been wanting to get some for a while now.
will do
Similar threads
