Tonyrodz
Resident Resident
Dropping it off Monday for the new throttle body.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
M1Gunner
Full Access Member
lol Ehh that's a bit pricey...
seven9st surfer
Full Access Member
Just finished the XM and Onstar antenna delete.
XM removed:
What was left behind:
After some APC and elbow grease:
And after some DA polisher action:
It's definitely not where I want it to be, but it's a start.
XM removed:
What was left behind:
After some APC and elbow grease:
And after some DA polisher action:
It's definitely not where I want it to be, but it's a start.
seven9st surfer
Full Access Member
Plugged up. I think the Duplicolor Clear yellowed on me a bit, but at least if I want to redo it, the plugs themselves were only like $4 total and sealed with silicone adhesive sealant.
The other side finished. This side came out a bit better:
The profile view:
Much better!
I still need to clean up the excess silicone once it cures, and maybe hit the area with the DA again.
The other side finished. This side came out a bit better:
The profile view:
Much better!
I still need to clean up the excess silicone once it cures, and maybe hit the area with the DA again.
Cattivo
Full Access Member
Try wet sanding with 2,000 grit...should remove it
seven9st surfer
Full Access Member
Thanks, might give that a try
BADRIDES
Full Access Member
- Joined
- Dec 18, 2015
- Posts
- 1,825
- Reaction score
- 1,278
What's the process to do this? Does the headliner have to come down to get these antenna's out?
#1taho
5150TAHO
That's a weard combo. But sounds stout
Tonyrodz
Resident Resident
Think so? I guess we'll see. I might get a shift kit in it! My 01 actually leaps shifting gears when I'm on it, which is always!
That's a weird way to spell weird lol. But it IS a weird word after all.
seven9st surfer
Full Access Member
Yeah, it does. Remove the 4 screws from the sunvisors, 1 screw from the upper control pod assembly and pop it down, pop off the A-pillar plastic, remove rubber around the sunroof, and pop out the clips from the passenger side handle. Headliner should drop down enough to get a wrench in there. It was a 10mm for the Onstar on the drivers side, and a 22mm for the XM.
Tonyrodz
Resident Resident
Eh... tomatoe, tomahtoe, it's all the same Red! Lol
mmeachem
Member
- Joined
- Apr 12, 2010
- Posts
- 1,031
- Reaction score
- 96
Changed the oil. How does the magnet look? Normal?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Tonyrodz
Resident Resident
I don't think it looks bad. How'd the debris look on the rag once you cleaned it off? Looks normal to me--from the pic.Changed the oil. How does the magnet look? Normal?
Sent from my iPhone using Tapatalk
inmypassatlife
Full Access Member
- Joined
- Feb 21, 2017
- Posts
- 979
- Reaction score
- 672
Where did you get those plugs?
TheAutumnWind
Full Access Member
- Joined
- Jan 8, 2015
- Posts
- 3,255
- Reaction score
- 1,997
Hah. Im dealing with this tomorrow. Do you have a scan tool that can read advanced codes? Mine says passenger side front impact sensor is bad.
There are 4 sensors so guessing at them could get expensive at $65 a pop.
Replacing mine tomorrow. Should be simple...
TheAutumnWind
Full Access Member
- Joined
- Jan 8, 2015
- Posts
- 3,255
- Reaction score
- 1,997
Lowes. Go back a vouple pages he even linked pics with product numbers.
inmypassatlife
Full Access Member
- Joined
- Feb 21, 2017
- Posts
- 979
- Reaction score
- 672
I went all the way back to pg1939, didn't see nada
seven9st surfer
Full Access Member
Similar threads
