Turbo Tahoe?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gat0r

Full Access Member
Joined
Dec 11, 2015
Posts
3,106
Reaction score
5,828
Location
DFW
sounds good

dyno yet?
interested to hear track times, when weather warms up ;)

also a triple disc converter would wake that up nicely.
im partial to precision industries vigilante from a build i did years back.
but circle D's are nice too
 
OP
OP
ibfreeman88

ibfreeman88

Full Access Member
Joined
Jun 2, 2018
Posts
92
Reaction score
229
Location
Chesapeake, VA
Originally when i got it tuned it made 364/400 on 5 psi. Since then i've made some needed changes to PCV system which was pressurizing the crankcase under boost. I've also turned it up to 10 psi which maxed out the fuel setup i have at 6k rpms. I have not put it back on the dyno again yet to verify numbers but somewhere between 400-500. i took it to the track previously on 5 psi and spun and the 60' was terrible due to the converter and spinning but it has the mph for a high 7 in the 1/8th with improvement on that stuff. It went 82 mph.

sounds good

dyno yet?
interested to hear track times, when weather warms up ;)

also a triple disc converter would wake that up nicely.
im partial to precision industries vigilante from a build i did years back.
but circle D's are nice too
 

Forum statistics

Threads
129,257
Posts
1,812,924
Members
92,359
Latest member
caprajohn
Top