TPMS Sensor Warning

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Lockout888

TYF Newbie
Joined
Dec 10, 2010
Posts
6
Reaction score
0
Have a 2008 Tahoe LS. Just got some new wheels, tires and TPMS sensors installed and my DIC is giving me a warning to check tire pressures.

DIC shows RF=36, LF=38, RR=38 and LR=39. I have checked the tires with a manual pressure gauge, and all the tires are between 38-40psi.

New tires are 305/40/22 and say maximum pressure is 44psi.

Any ideas?
 

blkonblk

Supporting Member
Joined
Dec 22, 2011
Posts
949
Reaction score
35
Location
NYC
when you install new tires you have to "marry" them to the vehicle, it will not pick them up automatically, i have two sets of rims/tires and i get this every time i switch them around


Sent from my iPhone using Tapatalk
 

CTLT13

Member
Joined
Aug 14, 2013
Posts
38
Reaction score
2
Location
The South
My sensors were acting up, went back, they forgot to "reset" the sensors they said, not sure what that means, the guy came out with a remote control looking device, big as his palm, went next to each sensor and reset them. The warning msg went away. I hope it's something as easy as mine. Good luck
 

Forum statistics

Threads
129,581
Posts
1,818,218
Members
92,824
Latest member
SayWhen
Top