Tonyrodz
Resident Resident
Ok guys, I've bowed to the pressure and I'm starting my build thread. I'm going to try to remember them in order, but it's been an ongoing process, so I'm a little foggy. I started with a bone stock 03 Tahoe, with 212,000 miles. Did duty as a real estate shuttle vehicle, so I'd have to assume all required maintenance was performed as I didn't receive any maintenance records. Came with the 4.8, 4wd and as a nice bonus the 3.73 rear. All the usual options, no onstar, Bose or moon roof, which is perfectly fine with me.
On to the mods.
Very first mod I did was to replace my front bumper, my original had a big dent in the center. Replaced it with a good used one. 2nd mod was to plastidip my stock Tahoe rims. Had the usual clear coat issues.![WP_20160603_001.jpg WP_20160603_001.jpg](https://www.tahoeyukonforum.com/data/attachments/75/75366-acb3165e04e7ff0616f5d44d7e6095f5.jpg)
I figured I might as well do my belt mouldings, as they looked a little faded and I hated the fake plastic chrome. I also dipped the stock chrome grill, as it had seen better days.
I then removed the lower plastic plates that blocked some vent openings. Get some more air flow in there. Can't hurt, right?
On to the mods.
Very first mod I did was to replace my front bumper, my original had a big dent in the center. Replaced it with a good used one. 2nd mod was to plastidip my stock Tahoe rims. Had the usual clear coat issues.
![WP_20160603_001.jpg WP_20160603_001.jpg](https://www.tahoeyukonforum.com/data/attachments/75/75366-acb3165e04e7ff0616f5d44d7e6095f5.jpg)
I figured I might as well do my belt mouldings, as they looked a little faded and I hated the fake plastic chrome. I also dipped the stock chrome grill, as it had seen better days.
![IMAG0251.jpg IMAG0251.jpg](https://www.tahoeyukonforum.com/data/attachments/75/75383-f0d46bf53aec3a2aac21f1b784472693.jpg)
![WP_20160416_019.jpg WP_20160416_019.jpg](https://www.tahoeyukonforum.com/data/attachments/75/75367-18d4ca08f05bab900a780530b41353da.jpg)
Last edited: