Stuffed 35 12.5's with only 2.5/1 spacer lift

[Mighty Hd]

How about some pics where you trimmed? I bet that thing is a slug off the line with the factor gearing though........ :-(

 

[Z1500]

I'm lucky enough to have the factory 4.10's so it's not bad at all. Lost a little spunk for sure but going to turbo it anyway.

I got the Spohn adjustable rear control arms that I'll put on in the next week or two. Assuming I can space the rear axle back 0.5-1.0" then trimming plastic to the rear seems easy enough.

Now what's going through my mind a lot is how I could space the front 'axle' so to speak, forward an inch. If someone made upper and lower A-arms that just had the ball joints forward an inch, it would be amazing.

 

[Zed 71]

Now what's going through my mind a lot is how I could space the front 'axle' so to speak, forward an inch. If someone made upper and lower A-arms that just had the ball joints forward an inch, it would be amazing.

For the front have to tried to adjust the camber to the + side?

 

[AppocAlexx]

@Z1500 I feel bad bringing up all these old posts but I have to ask what your measurements are at the fenders. I'm looking at doing almost the exact set up but I'm thinking I may have a tad bit more clearance up front that you with my set up.

 

[Z1500]

No problem. Where exactly would you like me to measure from and to?

 

[Jonah52]

Holy shit that's stuffed. That took some balls to trim lol

 

[Fir_Na_Tine]

Love it. What brand and size are the rims?

 

[LiftedTahoeLtz]

This is my 07 Tahoe ltz has a 3 1/2 lift on it I’ve been looking to put 35s on it. How much trimming did you have to do?